My e36

[e36mpwr]

Haha can you send me the link of the turbo you got if you don't mind. And what kind of chip is it.

[Jeff]

e36mpwr said:

Haha can you send me the link of the turbo you got if you don't mind. And what kind of chip is it.

I will send you links

[Jeff]

well i removed the gas tank yesterday dumped 2 gallons of gas all over the floor and it melted the bottom of my shoes. today i finished pulling out all the hoses, filler neck and gas tank related things.

[Jeff]

also i removed the rear subframe, trailing arms, basicly the whole rear end of the car.

[Jeff]

i need to cut off all the gas tank strap mounts, do some welding, and fix all the rusty areas so i can paint then undercoat everything. i think im going to relocate my fuel filter in the empty space where the gas tank was so its not on the motor where it is now.

[KaiserRolls]

damn man, you work fast!

[Jeff]

thats how things get done. now come clean the underside for me!

[B C]

Need more pics of melted shoes.

[Jeff]

Ha alright ill get them out of the garbage. When I go back out to work on it more.

[KaiserRolls]

whats all this talk of melted shoes

[Jeff]

if it ever stops pouring i will find the shoes. when i was taking the gas tank out i didnt know the tank was full.it spilled probly about 2-3 gallons of gas out. my shoes where melting and getting all gooy leaving black shoe prints.

[KaiserRolls]

so the floor was lava?

[Jeff]

KaiserRolls said:

so the floor was lava?

ha not quite. just covered in gas

[KaiserRolls]

so gas melted your shoes. not lava?

[Jeff]

yes no idea how.

[KaiserRolls]

update this thread with melted shoes and painted parts!

[Jeff]

KaiserRolls said:

update this thread with melted shoes and painted parts!

tomarrow i will post painted parts and the shoes. it is raining still.

[KaiserRolls]

Jeff said:

tomarrow i will post painted parts and the shoes. it is raining still.

Jeff, i hate rain.

[Jeff]

ha same here

[Jeff]

well today i finished painting the drive shaft i picked up,the subframe,trailing arms, sway bar,etc.

i finally get to use the solid subrame mounts i machined almost a year ago. replaced all the bushings and wheel bearings in all these parts. bushings  have also been sitting for about a year now too.