Need HELP No crank, no start with e36
-
Hmm, another possibility that will cost money and time, great. Thank you
-
You can try jump starting it. Off the ignition switch.it more of sounds to be the ignition switch problem if ews2 acts out it says screw you and won't crank over. Ews failure you won't have fuel ignition or cranking at all
If you think ews is the problem I can tell you how
To delete it
1976 530i e12
1990 325ix e30
1992 325i e36
1995 740il e38
2001 330xi e46
^More to come
-
New development, looks to be the starter. Decided to take it out of the equation just to be safe before deleting the ews, and it wound up having power to the S terminal when attempting to start. I don't think this is good news though, just cause its a pickle to replace apparently.
-
Thats what I'm in the process of doing. Gotta love old, brittle hoses on a 17 year old car with 220k. This is turning out to be the hardest starter change I have ever done.
-
Not really, the dumb power block or whatever its called that's in the lower part and has a bunch of hoses and plugs going into it is pissing me off. Mainly time constraint though, but I should be able to tackle it tomorrow.
-
Forgot to update, but its finished. It was a real pain especially with the wiring but marking the pigtails helped a lot. Once the manifold was out of the way, getting the starter out was simple. I bench tested it and it tested ok but drew less amps than expected and sounded weak. I'm assuming moving the thing around shook it off the bad spot or something. The new started fixed the problem though so I'm not worried about it. After putting the manifold back on and together the engine did take forever to catch for some reason. I understand the fuel pressure takes time to build up, but I have never had to try so long and so many times. I was worried that I might have not connected some sensor, but after some starting fluid, it barely coughed to life, and eventually ran fine. It does have a check engine light on now, so something did not go back together correctly, but that's for another day since the car does run great.
-
You can try jump starting it. Off the ignition switch.it more of sounds to be the ignition switch problem if ews2 acts out it says screw you and won't crank over. Ews failure you won't have fuel ignition or cranking at all
If you think ews is the problem I can tell you how
To delete it
How do i delete the ews? I have a 97 318is, lost the original key with the remote. Starts occasionally with the spare key however yesterday it locked by itself and doesn't wana unlock and its not starting (cluster lights comes on but no crank).
-
How do i delete the ews? I have a 97 318is, lost the original key with the remote. Starts occasionally with the spare key however yesterday it locked by itself and doesn't wana unlock and its not starting (cluster lights comes on but no crank).
I texted Jeff to let him know, he's not on here much anymore. The OP was dealing with a OBDI car with EWS, it's simpler as you can just swap out the ecu/dme for a earlier version. I'm not sure how the delete works on OBDII cars.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login