M20 Turbo => M50 turbo fun.
-
I never even caught your name!
Sent from the future. Or my phone, who knows.
-
Lol, I don't know if that was a good thing or bad!
I'm set on the m50 turbo now, so have no fear!
Sent from the future. Or my phone, who knows.
-
I'm a little late on this post but, a stock m20 with stock head gasket, ARP's, stock intake manifold, and hx35 12cm will easily give you 400+ whp (with a good tune)...
It's proven to handle 1 bar (350whp) all day long.
If you grenade it, no big deal.
Also, TB size doesn't really matter when FI. Most either o-ring or weld, m20's weak point is the head gasket pushing out into the coolant channel. Specifically cylinder #6 (hottest). Unless you plan on detonating, you wont get far.
GL with your new m50.
-
M20 on a stock head gasket will not make 400HP, nor will one without built internals, they take a little bit of boost alright but they don't make much power per lb of boost.
Sent from the future. Or my phone, who knows.
-
GunMetalGrey said:
M20 on a stock head gasket will not make 400HP, nor will one without built internals, they take a little bit of boost alright but they don't make much power per lb of boost.
Sent from the future. Or my phone, who knows.
Not trying to thread jack OP I'm also not sure if it's against the rules to link another forum but here goes...
Here is just one instance. I know he isn't using the stock head gasket but he is using shitty MB head bolts AND stock internals...93 octane.
Stock motor w/ 208k miles.
head was rebuilt @ 185k (valve job minor port cleanup stock cam/springs)
Metrick Blue bolts and Cometic MLS
boosted for over 20k.
437whp/380ftlbs on 20psi
http://www.e30tech.com/forum/showthread.php?t=112167
This thread has a couple turbocharged m20's (with dyno charts) slightly different setups. A lot of them have stock m20's pushing 400whp easily.
http://www.e30tech.com/forum/showthread.php?t=113066&highlight=m20+turbo+dyno&page=2
It's been done and proven...
Again OP, GL with your build.
-
Nick_08 said:
Not trying to thread jack OP I'm also not sure if it's against the rules to link another forum but here goes...
Rules? What rules?
We're all about spreading the knowledge, thanks for sharing the links. Those are impressive numbers. Would like to see some videos of those cars in action. -
M20B27eta said:
Rules? What rules?
We're all about spreading the knowledge, thanks for sharing the links. Those are impressive numbers. Would like to see some videos of those cars in action.If you read BobRoss' thread he has plenty of dyno and street kill vids
. Here: http://www.e30tech.com/forum/showpost.php?p=1307822&postcount=65 -
M30 turbo>M20. Just saying. I know you got your M50 with big penor power. But either way.
-
Brian said:
M30 turbo>M20. Just saying. I know you got your M50 with big penor power. But either way.
Dat shit cray
-
Im totally not against m20's in anyway, and I'm totally open to constructive thread jacking. Thanks funny. I had an hx35 12cm and literally everything else to turbo my m20, but for some reason, I went m50. I think basically because for the future, I want to be making big power, and I think that the m50nv is a pretty good base to start? I also like higher revving engines. Welding my head+Oring was over 400$ at my machine shop. Not only that, but I had to pull the engine anyway, so why not buy an m50 for 300$? All i have to do is arps, and mls for a decent 400. I dont know. I'm not saying anyone was right or wrong.
sk8 or die
-
A LOT of other stuff goes with putting in a turbo, I have a pretty good link selection going on right now for all the feed lines, oil blocks, return lines, fittings, injectors, all kinds of crazy freaking suff.
If you have any questions with the swap or anything else for that matter do let me know, I have done it a few times now
-
The only thing i have left to buy is intercooler piping, oil feed(I have the fittings), do i need to relocate the oil filter? Most people did with m20's. And i have to hook up my oil cooler. Thats about it. and buy mounts and stuff.. I will definitely let you know though
sk8 or die
-
Get injectors yet? I might have a set of freshly rebuilt 42lb'ers
-
No I have 42lbers. Anyways. Little update I guess? I've been finishing up my Volkswagen recently, and tearing into my father son project. We pulled the tub off the frame in the cj7, looking to buy a YJ tub, powder coat the frame, run new brake lines/fuel lines, rebuild the brakes, add about a 3 inch lift with some fender flares to hopefully put some 35's or maybe 33's. Re-ring and bearings for the AMC 360 coming in, carb rebuild(that was a first for me) and I guess that's about it? I will be finishing the heap before I put time into the bimmer. I have lots of time for the bimmer, but My father and I are taking a trip to Colorado camping when I graduate so I want this bitch to be done. That is all.
sk8 or die
-
Rowleym said:
Little update. Sold the DIYPNP and wasted spark setup in like 10 hours. Bought ms3x with Jim stim and 80# Injectors. I'll be running cop on the m50 with sequential injection. Me gusta e85
O__O
Are you encountering any other M50 turbo guys running injectors that size? you must be shooting for 500-600hp, no?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login