The One to End It All
-
That Bluetooth CSB
-
Engine bay cleaned up pretty nicely with some simple green and a pressure washer. I really wish the white cars didn't have yellow cosmoline. I would be tempted to not paint it but the yellow kills it so badly.
-
Yellow Cosmoline? What is that. Sorry, newb question.
Borrowed from the same factory they made mosin nagants at
-
Yellow Cosmoline? What is that. Sorry, newb question.
Cosmoline is a sealant / rust proofing that was applied to engine bays of E30's during transport. For the short duration it was on for transport no discoloration is usually observed, and dealers were supposed to wipe it out of the engine bays and apparently there was even a bottle of mineral spirits shipped in the engine bay to do so. Most dealers did not, and after the vehicles start seeing heat and use the sealant yellows and hardens, becoming very difficult to remove.
Circa ~2005 BMW was still shipping cars covered in a heavy wax coating that was pressured washed off with high heat water.
-
I forgot how much fun stripping seam sealer was! -
Pretty sure you’re correct. There is a stock “proportioning valve” on the main run to the rear line IIRC
Not sure about e30s, but the “proportioning valve” on an e21 applies the same pressure to the front and rear up to a certain pressure, and then biases after that. The intent is that during light braking, the rears get activated to even out brake wear and keep rust off the rotor... er, drums.
-
It's uncomfortable how easily everything comes apart on this thing... Parking brake lines running into the chassis came out without even pulling
Tossing in riser bushings and new trailing arm bushings, rebuilding and painting the brake calipers, repainting everything, installing new brake lines, and putting it back in without a diff or axles (current ones lack grease, and diff is wrong for my application)
Progress, not engine bay though, which I'm waiting for some warmth from the elements before painting.
-
It's uncomfortable how easily everything comes apart on this thing... Parking brake lines running into the chassis came out without even pulling
Tossing in riser bushings and new trailing arm bushings, rebuilding and painting the brake calipers, repainting everything, installing new brake lines, and putting it back in without a diff or axles (current ones lack grease, and diff is wrong for my application)
Progress, not engine bay though, which I'm waiting for some warmth from the elements before painting.
Refinishing the rear subframe is something I would like to do in the future. RTAB's, subframe bushings, powder coat the frame and the arms, and change the seals on the diff. I just need a place that the car can be up on stands for awhile.
-
Summer out here makes it hard to work on cars when there are so many awesome other things to do!
Finally laid some primer down in the engine bay -
Seams sealedHoping to shoot paint Saturday or Sunday
-
Considering the limited quantity of prep that was done on this I'm pleased with the way it turned out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login