2002 E46 M3 // Build Thread
-
Another small update, small details matter though right? Noticed the rear badge was pretty sun faded/cracking on the M stripe section. Rather than replacing the entire badge, if you just apply a bit of heat (enough to make it warm to the touch but not compromise the badge adhesive) the M stripes can peel right off and be replaced. I got the replacement vinyl from here if anyone is curious. Badge looks brand new and cost $8 and 2 min of time!
-
friend thought I was playing a prank saying I have to replace my mirror fluid. Cursed with the infamous dimming mirror delaminating and evaporating/leaking. Decided to take the DIY approach rather than send it off to save a few bucks. Ended up being a super easy 30 min project and looks brand new. Mirror link
-
Found my first moist surprise. Went to go disconnect the battery to start installing my headers, and my flashlight caught a little reflection. Turns out the passenger tail light lens was slightly detached, allowing water in
Thank god it didn't rust through the metal and I was able to wire wheel, clean, naval jelly rust dissolve and rust converter it. Finally I tried adding some etching primer to try to match the factory finish best I could. Probably not perfect but helps me sleep at night.
-
Did trans fluid change, oil change, cabin air filter and intake filter change and took it out for a quick shakedown this weekend. Of course found more broken stuff. Ordered UUC trans mounts and all new bushings/gaskets for the shifter carrier to go with the UUC EVO 3 when I install it. Rotors seemed a bit warped too with heavy braking, dang.
-
Exciting updates! Taillights look great, can't wait to hear those headers.
Same!! Here's a couple clips of my end goal:
https://www.instagram.com/p/B-7AvknDxzI/
https://www.instagram.com/p/B-qiBpGj2zJ/
The setup is fabspeed headers, stock section 1, resonated x pipe and a top speed muffler. Never even knew the S54 could sound like this, but JEESH
-
Same!! Here's a couple clips of my end goal:
https://www.instagram.com/p/B-7AvknDxzI/
https://www.instagram.com/p/B-qiBpGj2zJ/
The setup is fabspeed headers, stock section 1, resonated x pipe and a top speed muffler. Never even knew the S54 could sound like this, but JEESH
I’m not a huge S54 guy because of the typical sound of them, but that video right there changed my mind.
-
All videos with really good sounding S54s are deepfakes of an E36 M3 with a pitch adjustment /s
It is entirely possible to have a great sounding S54 but I have yet to find a quiet setup that sounds good enough to spend money on. Loud enough to actually hear it while driving but quiet enough to hear the induction sound and not be a nuissance.
When you see inside the stock muffler its a bit baffling at how they arrived at such a design.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login