....and so it begins, project Turtle Farts.

[SteelBlue]

I love my F30. Have a 14' 328Xi.

Does it the have big screen?

[Jdesign]

BC coils are the best bang for your buck IMO. Contact them directly and they can get you custom spring rates if you want to go that route!

Congrats on the full family conversion

[timmer]

Post E30 picnic update....

Car is up on jack stands, Chinese GSP axles are out.  Took some time to tidy up the undercarriage, fix some little things, and add some upgrades.

Cleaned and painted the brake calipers, and ordered stop tech pads/rotors all around.

Parts should be here when I get back from Canada and she will be back on the road doing Smokey burnouts!

Also added a euro front plate to let the other bimmer heads know there is something lurking under the hood...

Till next time!

-Tim

[YoungCR]

Love the plate!

[wasnt m3]

Your car looked amazing at the picnic. Here's to a speedy recovery!

[timmer]

wasnt m3 said:

Your car looked amazing at the picnic. Here's to a speedy recovery! 

Thanks, She is back on the road!

 I can’t believe how much smoother the GNK axles are... no more rear end vibrations, or chattering.

Dropped her off today at the paint shop to have some paint correction done to fix a few spots on the hood, trunk and roof that developed since the respray last spring.

When she gets home, it’s time for an oil change, and install an oil level sensor to get rid of that pesky oil light on the overhead console.

I think I’m done with the old girl for now... time for deletes/tune on the X5 35d

-Timmer 

[YoungCR]

timmer said:

I think I’m done with the old girl for now... time for deletes/tune on the X5 35d

Oh fun! Curious to hear how that goes, those were a fun to drive already.

[timmer]

Been busy enjoying the car for the summer, but found some time tonight after work to finally tuck the bumpers...

Still have a bit of work to do getting the front valance right up against the bumper to fill the gap, but I’m happy with it for now! 

-Tim

[timmer]

Christmas update!

Apparently I was good this year, and Santa brought me a Riot Racing big bore throttle body, and a Red46 skid plate.

who else is ready for spring? 
 

Have a great New Year!!

-Timmer

[B C]

Which tune do you have?

[SteelBlue]

Whats the difference on the diameter of the throttle body?

[timmer]

I'm running a custom tune by Mark D'Sylva for 93 octane, the schrick cams, 7200 rpm limiter, upgraded intake, and fuel injectors.

This throttle body is 68mm (+4mm) and supposed to flow 11% more air.  It adds a negligible amount of hp/tq, however throttle response is supposed to be vastly improved!

https://westcoastriots.com/shop/automobile-machine/e36-e34-6-cylinder-engine-bmw-p-n-13541748105/

I'm trying to squeak every little bit out of this S52 without a turbo, for now, lol.

-Tim

[straight6pwr]

its really refreshing to see an early model still being giving proper treatment. the wheel/tire/suspension fitment is spot on.

[B C]

There is never enough power!

That car must rip though. Next step itbs, Megasquirt 3 and a dyno tune

[SteelBlue]

I did not realize this had BBS LM's. Favorite wheel of all time.

Didn't know they made this in 4x100. 17" or 16"?

[timmer]

SteelBlue said:

I did not realize this had BBS LM's. Favorite wheel of all time.

Didn't know they made this in 4x100. 17" or 16"?

Thanks! They are 16’s.  I have a set of 17” ACT wheels also that look good, but the BBS’s are my favorite...

BC, ITB’s would be awesome!  Mark did the dyno tuning when the previous owner built the motor.  As it sat before the BBTB, it put down 274hp at the wheels on 93 octane. The ZF320 mates well with the 2.92 rear end too; nice easy revs on the highway with plenty of snap.  

You’ll have to take it for a spin next time we get together!

[B C]

timmer said:

 Mark did the dyno tuning when the previous owner built the motor.  As it sat before the BBTB, it put down 274hp at the wheels on 93 octane. The ZF320 mates well with the 2.92 rear end too; nice easy revs on the highway with plenty of snap.  

You’ll have to take it for a spin next time we get together!

[straight6pwr]

timmer said:

BC, ITB’s would be awesome!  Mark did the dyno tuning when the previous owner built the motor.  As it sat before the BBTB, it put down 274hp at the wheels on 93 octane. 

thats a great number! do the cams make it peaky?

[timmer]

Thanks! The cams are good all around.... low end torque suffers a bit, but doesn’t affect drivability at all.  The engine really wakes up above 4,000 rpms when the cams and vanos are working together

[GunMetalGrey]

timmer said:

Mark did the dyno tuning when the previous owner built the motor.

Was this guy somewhat local to the valley?