WIBIMMERS

AJK430

Make offer before I scrap them

Want them gone in the next 24 hours.

ASA CSL Replicas 17’s (one bent)

X5 Style 58 18’s decent

Oshkosh

920 479 0299

AJK430

Still looking for an M50 or M52 maybe even S52 S54.

AJK430

GunMetalGrey said:

5k per picture?

I wonder if there is a general rule of thumb, say, $750 asking price per picture?

Gunmetal Grey I’m wondering if you ever have anything to say that’s not generally derogatory. Every time I see anything on here from you it’s condescending.

AJK430

OBD1 S52 out of 1999 BMW M3
ZF 5 Speed out of same car^
M50 Intake Manifold
Nearly every gasket in and on engine is new
Safety Wired Oil Pump Nut
New Oil Pump Pickup Gasket
New Rear Main New Oil Pan Gasket
New Valve Cover Gaskets
New Condor Speed Shop Motor Mounts
New Fuel Lines
New Thermostat
New Water Pump
New Accessory Belt
New Tensioner Pulley
New Knock Sensors
New M42 Radiator
New Spal Electric Fan
New 80C Thermostat Switch
New Bosch 02 Sensor
Newer Alternator
Newer Interstate Battery
Condor Power Steering Block Off
New Meyle Tie Rod Ends
E36 M3 Lower Control Arms
5 lug nut conversion
5x120 wheel hub
E46 330i brakes
E46 wheels
Bilstein Shocks
HID Headlights
Chase Bays BBE with Wilwood Master and Clutch Feed Adapter.
Stainless Braided Lines
Exhaust is Solid
Will need alignment because of new suspension parts

Car has rusty floor pans and rails and battery box/ trunk holes. And some weird bubbles and rust on the roof. Has been painted. Exterior is 6/10. Interior is 6/10. Nice sport seats.

920 479 0299

$10,000

AJK430

I also think I tried to buy this car... Was it email only? No phone number? He never emailed me back

AJK430

Welcome,

I've got a 1991 iX also. Bought it crashed and cant figure out what to do with it. I just cant bring myself to part it out or sell it. Haha.

Im always in Madison and my shop is in Baraboo if you need help or want to help!

AJK430

https://appleton.craigslist.org/cto/d/appleton-e30-5-speed-1986-bmw-325e/6776999364.html

AJK430

Brand New Avant Garde 19x10 M359

I only have the one...

$275 Brand new Ill take $225 Local Pick Up/Meet Oshkosh Wisconsin

AJK430

That looks great! Thanks for sharing. Maybe ill keep them around haha.

AJK430

m42b32 said:

I was wondering if that IX with front end damage on Craigslist was yours?

Yep. Still toying with the idea of parting it out. I have a frame guy out of Hartford going to do an estimate on pulling it straight and welding in a new core, but if I can unload it I wanna focus on my S52 e30

AJK430

m42b32 said:

@AJK430?

Yas. Brought them up to my dad to see if he wants to put them on his X5. Otherwise theyre for sale. Style 58's. Traded a dude on here for the KMAC Camber Plates

AJK430

Style 58's off an X5 took on trade.

Will trade for BMW z3 steering rack or e30 stuff.

or cash

AJK430

These were off the parts car that I bought for my S52 E30. I know they were not on the E36 for very long... Just got rusty when I trailered the car on an open trailer in a blizzard then sat.

So the bearings and bushings should be like new. Just some corrosion externally due to the reason above.

Wash, grease and go.

$200

AJK430

Curious if anyone can help me identify these rear trailing arms by part number. Ive searched around and nothing comes up with this part number or any variation of it..

They're thought to be off a 6 Cylinder Z3 for my 5 lug swap, I just want to confirm so I order the right bearings but nearly all of the trailing arm part numbers start with 333.

These start with 385... if you drop the 7. Haha.

The numbers end in 762 and 761 for right and left which is consistent with the other trailing arm part numbers ive found but nothing starting with 385... And those 7's look an awful lot like 1's...

Im embarrassingly confused.

Help PLEAAAAASE!

AJK430

snap said:

Mods GTF in here

@mods

EDIT: I just realized it was already moved. Carry on gentlemen. Looking forward to progress and inpending compression test results

Hahaha. Well i drove the car I pulled the engine out of.. Happened to do a few donuts on the way to the garage. Its strong.

AJK430

GunMetalGrey said:

There is frequently a ground point on the opposite frame rail.
Just a stud chilling out with a bit of a flat plate behind it.

Mods should move this thread to the build thread area.

Please do

AJK430

AsparagusMike said:

It looks as if the bracket was used as a grounding point. Found this pic off a thread on r3v that shows a ground strap hanging from there.

Thanks Mike! Did you end up grounding that there on your swap or going elsewhere?

AJK430

Also what is this bracket for on the drivers side frame rail!?! I don't recall removing anything useful from there and I'm having a hard time seeing it in other e30 bay pictures and it doesn't exist on my 1991... you can also see it in the last picture I just posted above... this picture below is NOT mine. Not sure what hes doing but its the only thing ive found that references this bracket! Just want to know before I hack it off for my tuck!

AJK430

Alot of behind the scenes progress so to speak as far as acquiring information and components for my harness. I've got the harness out of the donor car, ill be working on getting that crossed over to utilize the C101 to mate to the chassis of the 86 e and deleting whatever isn't necessary. Also a ton of time spent cleaning up the engine and bay, deleting brackets for a mild wire tuck and chipping off and wire wheeling 20 years of crusties off the S52 cast block. Also still have to swap the pan and sump, build a dipstick with CCV and safety wire the oil pump gear on.

Im working on a complete list of things that have yet to be done so I can logically go about completing them so I don't have to back track! Ill get my list together and post it up so if you guys can help me out that way that would be awesome!!