SCHLEPN | The E39 540itA Story
-
-
Mike did the rear brake lines. They were bad! We also put in 14" rear braided lines so there was some slack on the line when you jacked up the car.
The DMTL light seems to be off for good now. Had to swap some wires on the pump wiring.
Next up is some rust repair on a jacking point & Dinan rear diff reinforcement!
@DrLeadFoot
-
All engine lights are off! Running great.
Have an appointment to get the jacking point fixed due to rust on Tuesday.
Also have a right rear speed sensor waiting to be installed.
Body and interior are next! Priorities are to stop the rust and fix the sunroof rattles.
@DrLeadFoot
-
Priorities are to stop the rust
Then parks in salt mine...
-
Then parks in salt mine...
Confronting my fears, face to face.
@DrLeadFoot
-
Mr. Milo!!!
The face he makes just before "Daddy, I drive it?"
-
Structure Fabrication cut out the rot/rust on my passenger rear jacking point and rebuilt/over built it back up looking as close to stock as possible. Rust proofed it all. Pretty big job as they had to pull the gas tank. They found some old bondo from a hack job fix from years and years ago. Glad they got in there to cut out the cancer!
They also popped on my new snow tires on the "new" wheels! 245/18/40 Blizzaks on some 6 series wheels. Not sure which style code they are. 18 x 8.5 et14 if I remember correctly.
@DrLeadFoot
-
-
Awesome.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
bet you had some fun today!
Not too much fun. SCHLEPN tires & wheels back and forth from Stallis and trying to keep up with this crazy Real Estate market! It's still going strong!
Awesome.
I agree!
A birdy said you're the go to guy for a suede headliner. Let's talk!
@DrLeadFoot
-
Not too much fun. SCHLEPN tires & wheels back and forth from Stallis and trying to keep up with this crazy Real Estate market! It's still going strong!
I agree!
A birdy said you're the go to guy for a suede headliner. Let's talk!
I may have done a few in my time.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
I'll pop some 5mm spacers on the rear to get it a little better stance.
@DrLeadFoot
-
10mm rear spacers installed. I think this makes the wheels ET 4 in the rear and ET 9 in the front.
Structure and Fab sent some pics of the rear passenger jacking point rebuild. Thank goodness Chris is better at fab work than taking pictures.
@DrLeadFoot
-
Merry XMAS!!
Update: Running strong! Need an oil change soon and the rear subframe will be coming out to pop in new M5 bushings and weld in the dinan diff reinforcement.
@DrLeadFoot
-
What are the OE M5 rear subframe bushings like? I got a set of Powerflex yellow ones for my dad's wagon but haven't installed them. It's parked for the winter so it won't be until spring.
Not sure on stiffness but the M5 bushings are a tad shorter and allow for the reinforcement trailing bars to be installed.
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login