2018 holiday sales, promo codes, etc.

[m42b32]

Any time I buy something from FCP lately I put it in my cart (while logged in) and let it sit for like 2 days, then you get a 5% off $199 or more coupon emailed to you. It's worked for my last few orders

[YoungCR]

m42b32 said:

Any time I buy something from FCP lately I put it in my cart (while logged in) and let it sit for like 2 days, then you get a 5% off $199 or more coupon emailed to you. It's worked for my last few orders

I've done this too. RevShift also has a black friday sale

[Jdesign]

straight6pwr said:

if you're into upgrading lighting, the retrofit source does black friday sales every year. its the only time i buy their stuff.

https://www.theretrofitsource.com/

Nice. This is dangerous as they have a discounted items page with "lots" of misc bulbs.

[Boris3]

Garagistic sale just went live

https://store.garagistic.com/index.php?route=product/special&utm_source=All+Customers&utm_campaign=c34b384f8c-EMAIL_CAMPAIGN_2017_11_16_COPY_01&utm_medium=email&utm_term=0_3b735b0908-c34b384f8c-3019345&mc_cid=c34b384f8c&mc_eid=8cd6c2fd20

[straight6pwr]

Boris3 said:

Garagistic sale just went live

https://store.garagistic.com/index.php?route=product/special&utm_source=All+Customers&utm_campaign=c34b384f8c-EMAIL_CAMPAIGN_2017_11_16_COPY_01&utm_medium=email&utm_term=0_3b735b0908-c34b384f8c-3019345&mc_cid=c34b384f8c&mc_eid=8cd6c2fd20

their stuff is so shoddy though!

[P_Roloff]

straight6pwr said:

their stuff is so shoddy though!

You think I'd be okay buying the spacers for an e30 rack swap from them, or would they likely screw that up too? I'd machine my own, but I don't have the dimensions for them.

[straight6pwr]

i dunno man, from everything I've seen, and others here have seen, it looked like monkeys are doing the fab work. they plasma cut small holes instead of drill them. short-cuts!

Look I took a screenshot from their website, and i'm going to point out how terrible their work is:

[P_Roloff]

straight6pwr said:

i dunno man, from everything I've seen, and others here have seen, it looked like monkeys are doing the fab work. they plasma cut small holes instead of drill them. short-cuts!

Look I took a screenshot from their website, and i'm going to point out how terrible their work is:

Yeah, no thanks. Guess it's back to searching. Worst case, I guess I buy the metal spacers everyone else uses and cuts in half, use them to measure and machine the correct sized stuff.

Thanks Dan, appreciate the insight. Didn't realize how truly bad some of their crap was.

[AsparagusMike]

I used their steering rack spacers when I went z3 rack and had zero issues with them. The reinforcement kit is also not all that bad. Yes they did take some tweaking (drilling out holes to bigger size, modifying rear sway bar reinforcement to fit correctly as @straight6pwr has pointed out)  to make work but, for the price it was worth the little bit of hassle over trying to make my own.

Although, I am not having very good luck with their eccentric hardware for the rear sub frame. The installation was straight forward and the hardware fit well but the outside cam bolts are impossible to get tight when the sub frame is in the car and they consistently walk all over the place throwing the whole car out of wack which leaves me to have to drop the subframe once again and come up with some kind of fix for it. NEVER AGAIN!

[Boris3]

I've got their adjustable reinforced rear subframe on the track car. Worked well this season.

[straight6pwr]

been watching and waiting awhile to pull the trigger on an electric impact wrench.  (pun intended)

finally one has hit the price point, size and performance I needed. Milwaukee 18v mid-torque with battery for just over $200. The mid torque has 600ft lbs, which should be more than i'll ever need. The size is insanely small for the torque spec - it's smaller than a hand drill. I'd rather a hog-ring, but the detent-pin will work fine, and per the internet can be modified to be less intrusive. Not sure how long the sale will be on, and I didnt want to wait for any other black friday deals since this is a pretty solid deal already.

https://www.homedepot.com/p/Milwaukee-M18-18-Volt-Lithium-Ion-1-2-in-Brushless-Cordless-Mid-Torque-Impact-Wrench-W-Pin-Detent-Kit-W-1-5-0Ah-Battery-2860-21/304139246

[Boris3]

Grassroots Motorsports deal: 1 year subscription (new or renewal) + a tshirt for $10 (free shipping on the shirt)

https://store.grassrootsmotorsports.com/products/grassroots-motorsports-black-friday-bundle?utm_source=ActiveCampaign&utm_medium=email&utm_content=Black+Friday+Deal%3A+Put+down+that++and+open+this+email!&utm_campaign=GRMBlackFriday

[HipMF]

15% off ebay today when you use the app, up to $100 discount:

https://pages.ebay.com/promo/2018/1121/70319.html

[AsparagusMike]

[m42b32]

P_Roloff said:

You think I'd be okay buying the spacers for an e30 rack swap from them, or would they likely screw that up too? I'd machine my own, but I don't have the dimensions for them.

https://www.condorspeedshop.com/collections/e30-parts/products/e30-airbag-steering-swap-kit-with-airbag

I have these, they fit, $7 with black Friday pricing

[m42b32]

Chase bays has a 20% off sale going right now: https://www.chasebays.com/

10% off Apex wheels: https://www.apexraceparts.com/wheels/bmw-wheels.html

Condor has a great sale going too: https://www.condorspeedshop.com/

[Jdesign]

I hate this. I full on spent wayyy to much because of this damn holiday.

[P_Roloff]

m42b32 said:

https://www.condorspeedshop.com/collections/e30-parts/products/e30-airbag-steering-swap-kit-with-airbag

I have these, they fit, $7 with black Friday pricing 

Ooh, this’ll be perfect! Thanks!

[i_love_cars]

Jdesign said:

I hate this. I full on spent wayyy to much because of this damn holiday.

don't even get me started. BimmerWorld was 21% off BBKs so I got stoptechs for the E46, plus 25% off Epic tunes which I need for my swap so I've frontloaded that as well

[straight6pwr]

still waiting for an email to say they made a mistake on their price...

$6.60 per HP.