Ferrari mechanic, tho Bmw fanatic

[Jdesign]

Did you work on that F50 GT?!!?! amazing car and welcome!!

[Drgt5683]

Through it with a fine tooth comb !   Completely disassembled and reassembled the car so ges I can say yea I worked on it ,is one hell of a car , you’d be surprised what’s underneath 

here some more fun photos,previous cars ,projects exc...enjoy enjoy !!

[Drgt5683]

So again I had time to tear into the car a little bit been running very well and I’m sooper impressed with everything so far unfortunately tho my gDanm a/c has a leak now between the condenser somewhere and maybe the lines idk excactly yet so I’m tearing into that I went ahead and ordered a new condenser/w/dryer almost positive it’s cracked rite there...,along the way I also decided it’s a perfect time to start modifiying a custom cold air inlet system out if some other pipes I’ve been saving for a project just like this one,very excited! ,once I mark it,cut it all up and route it, I have a buddy from work who has very good skills in metal I plan to have him finish up along with the resonator delete to x/pipe conversion with mandrel bent downpipes ...I’ll keep ya posted,can’t wait

[HipMF]

Ah, you're in my old hometown. I still remember when you could rent Neo-Geo from Tri-Star... The Mexican food there is better than the old video rental place ever was though.

Edit: just noticed the pick of the e34 with the ladder on the roof. I remember seeing that car around before I moved a few years ago. Why were you always hauling ladders around?

[Drgt5683]

Yea I used to do construction for years as a sub then work on car/bmws for side jobs and fun after ...untill I realized it was actually more enjoyable to me working on cars then I gave that all up and picked up a job with a local bmw friend at a transmission shop ,now I work on and take care of some of the rarest and most sought after cars ever made🤯 not just Ferrari’s ..

well I stayed up last nite to start making my colder air relocation inlets even tho the ones from mmp are cute and all I still prefer them boxed off of colder air so this is what I came up with so far I think it will work ,I’ll have to still notch out the front pipe to turbo to connect to the other pipe basically like a Ypipe inside the bay and yea I decide to trash out some plastics on the very front wich were kindof just in the way for me ,tho I’ll still have to make the fender liner itself fit properly ..should be almost plug and play when I’m done !

[Daggerty]

265s, put them in the front. Interested to see how the pipe looks all welded up. Now you won't have to run the quad double double deep intercooler the n54ish guys are running. 

I would say make a jig for the pipe and sell them but the stuff you got rid of wouldn't be considered plug and play for the home gamers.

keep it up

[Drgt5683]

With some finagling I was able to make this one work for now ..I think I mite end up changing it again cause I was in a hurry like usual but it’s a start and my first mock up so will see results ..onto getting my dang a/c condenser out so I can replace that now..so on my way to get my condenser I stopped at the stealer to get a couple orings for the lines to condenser, 12$ for 2 orings and a plastic fill cap wich was less than the rings themselves..is why I could never actually afford to buy a brand new car but dam anyway..,Well here’s a few more pics of the first ‘mockup and a couple pics from the dealer that caught my attention driving out 

[Drgt5683]

So I’m actually impressed with the inlet system other than the gawdy look for wich i managed to figure something out with but I think I’ve come up with a better routing plan anyway!!!, I’ve been contemplating just getting a larger but yet shorter/not as wide radiator and condenser so I can have an entire or half the right side kidney grill as my air inlet so its almost a straight shot to the snails ..get me 3-4” to work with and I can fab something up in no time ,then if I go big single turbo I can still use the same routing as well I’ll be pondering this and cost of coarse .Something fun to do I ges ,in the mean time I’m working on putting my new condenser in today !

[Jdesign]

What am I looking at?

[Drgt5683]

Lmao hahaahhaha I’ve been waiting for someone to ask ! ...so I have had numerous bmw’s over time 20+, so parts have accumulated , when I’m bored I think outside the box some ..That there is a bmw e34 headlight lense just the curved glass projector taken out of the headlight itself with a bmw logo fit inside of it ! I thought was pretty cool hanging on my garage wall for years and figured hey what the heck it fits midas well make it work.anyway here are some more older pics of past cars and past shop time .and yea that’s a 40’ ladder from when I did construction lmao better than any truck!

[GunMetalGrey]

Are you Brian? Or do you just know Brian? 
Have I met you in person before? I showed up to the house (4 pictures up from the last one) to look at an e30 (don't remember which one) in my swapped red e30.

[Drgt5683]

B’ and I are good bmw friends ,we met through bmw’s and have always kicked it working on them for quite a while now ,he is one very talented guy and yes the two pics are from his garage ,he asked me to dig them up some time ago