Hayden's Stock 325i Build Thread
-
I've had an ebay chip make the car run absolutely terrible too so don't be surprised if that occurs.
Looks like a good mostly unmolested starting platform for a build or a nice car to clean up and enjoy as it is. Any plans to refresh the old, tired bushings?
I'm assuming the seats are tan based on the color of the dash?
Yeah current plan is exhaust, intake, coilovers until i can find more things i wanna change. Once my ti sells ill be ordering coilovers and welding a muffler delete.
And yup, full interior is tan. Love it!
-
You don't want a total muffler delete. It will be fun for about 2 days. I made something that looks like the Rouge DMS. It sounds great but I don't have anything that would record it with any hint of quality. The mufflers were 55$ shipped from Heartthrob. There are some pictures in my thread. The pipe I used was EMT conduit from the scrap bin at work but it could be done nicer. This car has 280k on it...
http://heartthrobexhaust.com/glasspacksandflowpacks.htm I think I used 2612501 they are made in Minnesota and the quality is significantly better than cheapo mufflers like Thrush you find at your local parts store for the same price. They also offer stainless of the same thingfor about 70$ each I think.
-
You don't want a total muffler delete. It will be fun for about 2 days. I made something that looks like the Rouge DMS. It sounds great but I don't have anything that would record it with any hint of quality. The mufflers were 55$ shipped from Heartthrob. There are some pictures in my thread. The pipe I used was EMT conduit from the scrap bin at work but it could be done nicer. This car has 280k on it...
http://heartthrobexhaust.com/glasspacksandflowpacks.htm I think I used 2612501 they are made in Minnesota and the quality is significantly better than cheapo mufflers like Thrush you find at your local parts store for the same price. They also offer stainless of the same thingfor about 70$ each I think.
I think I convinced him to get a used Manzo Catback for 75$ instead.
Sent from my SM-G955U using Tapatalk
-
I think I convinced him to get a used Manzo Catback for 75$ instead.
Sent from my SM-G955U using Tapatalk
Where the heck are you finding one for that price?
-
Rekpoint said:
I think I convinced him to get a used Manzo Catback for 75$ instead.
Sent from my SM-G955U using Tapatalk
Where the heck are you finding one for that price?
MNbmw classifieds on Facebook. Hayden and I are closer to the Twin Cities than to Milwaukee.
Sent from my SM-G955U using Tapatalk
-
MNbmw classifieds on Facebook. Hayden and I are closer to the Twin Cities than to Milwaukee.
Sent from my SM-G955U using Tapatalk
Ah, gotcha. Good price. Thought you were finding it new for that price...I was going to cancel the pre-order on my catback purchase
-
post a redline clutch dump video soon please
I might be able to do that
What coilovers and intake are you looking at? I would highly recommend an AFE intake and if you wanted a true exhaust, the Rogue Engineering DMS is one of the best options out there.
I didnt have an idea of what intake I wanted, I was gonna look for them more after my Ti sells. And I would be getting raceland ultimos. I know, i know racelands arent the best but I lived with Rokkors in my Ti, which are pretty much the same as racelands, so I dont have any beef with them.
-
Are you wanting to go mega low? You might be better off with just lowering springs and good shocks. You will end up with an excellent ride and not be too expensive. I have Eibach shocks/springs and it rides great and is low enough. Lot's of people do H&R springs with Bilsteins too.
Just throwing another option out there. You can also expect a good shock spring combo to last for many years and miles where cheap coilovers likely will only last a few years, especially in our nasty winter climate.
I have some Bilstein rear shocks that don't look pretty but seem to work ok that you can have for free if you want them. They need new upper mounts. I live on the IA/MN border on I35, I think you mentioned you weren't far from Minnesota.
-
Are you wanting to go mega low? You might be better off with just lowering springs and good shocks. You will end up with an excellent ride and not be too expensive. I have Eibach shocks/springs and it rides great and is low enough. Lot's of people do H&R springs with Bilsteins too.
Just throwing another option out there. You can also expect a good shock spring combo to last for many years and miles where cheap coilovers likely will only last a few years, especially in our nasty winter climate.
I have some Bilstein rear shocks that don't look pretty but seem to work ok that you can have for free if you want them. They need new upper mounts. I live on the IA/MN border on I35, I think you mentioned you weren't far from Minnesota.
I really appreciate the offer, but I am pretty dead set on coilovers. Im going to go 2 inch drop until the summer where I will go 3-4.
-
And I would be getting raceland ultimos. I know, i know racelands arent the best but I lived with Rokkors in my Ti, which are pretty much the same as racelands, so I dont have any beef with them.
I ran Rokkors on my compact back in the day so I'm no stranger to them. I also ran Raceland Ultimos on my e36 coupe so I'm not really against them for a budget coilover. I just didn't know if you were planning on just slamming the car or if you were going for something that was going to handle well and be performance oriented. I'll be running Stance coilovers on my compact drift car next year.
I had the Ultimos on the front of my car at this point and the rear setup was 18k rear springs from BC with 97 Mustang GT rear shocks. I really needed a set of rear shocks properly valved for such stiff springs but the Raceland springs were way too soft to run that low with that fitment. The mustang shocks are shorter and stiffer than the Raceland shocks so I needed them for having any suspension travel at all at that height.
-
I really appreciate the offer, but I am pretty dead set on coilovers. Im going to go 2 inch drop until the summer where I will go 3-4.
Sounds good, I wasn't sure what your were going for so I thought I would mention it.
-
I just didn't know if you were planning on just slamming the car or if you were going for something that was going to handle well and be performance oriented.
Yeah I am going for both low, and better performance than stock. I wanna hit corners and look good doin it like in my compact, if you get what I'm saying.
-
Well today was half-successful! I got my wibimmers sticker that Rekpoint gave me (Thanks! :D) on my car, pictured here:
Then I put on a manzo catback exhaust I picked up on the 2nd
A little more quiet than I expected but thats okay
It is substantially lighter and makes my M50 sound fantastic!
Only reason today was only half success was that I did not get around to the thermostat today, thats going to get done on Friday. -
Well today was half-successful! I got my wibimmers sticker that Rekpoint gave me (Thanks!
) on my car, pictured here:Then I put on a manzo catback exhaust I picked up on the 2nd [emoji4]
A little more quiet than I expected but thats okay [emoji4] It is substantially lighter and makes my M50 sound fantastic!
Only reason today was only half success was that I did not get around to the thermostat today, thats going to get done on Friday.
Are the rings in the exhaust silencers? Possibly try to remove them. You didn't even show off the overpriced backpack!!!
Sent from my SM-G955U using Tapatalk
-
That exhaust looks really nice!
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
yep, looks good
I even wonder if painting the inside black would look better or worse
A month of driving and they'll be black anyway, job done!
-
Hey all! Well I got a lot done today last night. Forgot to take a lot of photos, but I got a few little pics.
I fixed my windshield wiper stalk!! Whole new assembly in there, and its working great.
There is the new thermostat housing, and there's a new thermostat in there. It is running great now and up to temp, perfect for winter drifts.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login