A purists nightmare - E46 drift build

[Tkuhn]

@patsbimmer1 @Jdesign true Haha I'll have to order them either way cause I smashed the fuck out of them getting the old ones out 

And Jason that's not the worst idea Haha. We will see how ambitious I get.

[wasnt m3]

I think it'd look nice and clean if you wrapped the reflectors to match the car, just my 2 cents.

[Tkuhn]

wasnt m3 said:

I think it'd look nice and clean if you wrapped the reflectors to match the car, just my 2 cents.

That did cross my mind as well.

[Tkuhn]

small update:

Installed the shift pin and detent pin repair kit last night. Then got the trans into the car along with everything I had to take off to pull it. The clutch works correctly now lol. So the car is back on the ground. 

Also I finished the Frankenstein mirrors that a friend from Instagram told me I could make. It's a combination of some aftermarket e46 base plates and a Nissan style mirror. He didn't want me to completely share his secret though haha.

Although these are proably a level 15 on a scale to ten for wrapping I still attempted it. Not 100% happy with it but I'd say I did okay.

And here's a pic installed on the car.

I really dig them, looks way better than the e36 M mirrors and more out of the box than e46 M mirrors.

[patsbimmer1]

I have a very strong feeling I know what mirrors are!  I really like the way they look on the car.

[Rekpoint]

They kinda look like ganadors!

[Jdesign]

Tkuhn said:

ganador mirrors!

[Tkuhn]

Jdesign said:

ganador mirrors!

Nope hahah

[Tkuhn]

Small update.

@Sam_Holzmann 3d printed me a dome light holder since it bothers the fuck out of me that I have no lights in the car when I open the door at night besides the ones on the floor. This is version 1 and needs some modifications to fit well but it works for now! I also put some leds it it because why not. 

I also added a top windshield strip with the same wrap that the car is wrapped in. I dig it, although I did go below the "A" line because I think it would have looked stupid with how small it would have been at the "A" line.

[Jdesign]

Dude this looks so KILLER. 

Tkuhn said:

Nope hahah 

TF you are killing me. I assume they are K6 or some reps then? They look identical minus the parting line at the base.

[Tkuhn]

Finally put in the driver side kickpanel/dead pedal that I've had sitting around since last summer. It required a little modification because of the floor plate.

Also got some new harnesses, the blue ones are fine but looked wack with the red steering wheel and white car lol.

super hyped on the interior again with the rear decklid and block off being complete along with getting those rear panels in earlier this winter.

[Jdesign]

Jdesign said:

Dude this looks so KILLER. 

TF you are killing me. I assume they are K6 or some reps then? They look identical minus the parting line at the base.

So you are leaving me(us) in the dark.

[Tkuhn]

Jdesign said:

So you are leaving me(us) in the dark. 

Kindaaaa Haha my dude did ask me not to tell what the combo was to make them hahah

[Jdesign]

I am making it a mission now.

[Jdesign]

Im not saying I figured it out, but I think I figured it out..

I cropped the vehicle info to keep it a secret. 

[Tkuhn]

Jdesign said:

Im not saying I figured it out, but I think I figured it out..

I cropped the vehicle info to keep it a secret. 

These are close but not what I have, I have a actual brand of mirror lol

[Tkuhn]

Wrapped the rear bumper tonight. Turned out better than the first time I tried. If you guys see the car in person you'll know what I mean.

Also as you can see I opted for the clear reflectors.

Also my DME showed up today as well, from getting a few modifications to the tune. So the goal for the weekend is to finish getting fluids in the car and have it up and running.

[Tkuhn]

Update: 

Got all fluids in and started up with no problems. 

So since it was nice today in had to pull it out in the sun! It's almost hard to look at with the sun and no sunglasses Haha

And here's a pic with the rear bumper on. I have a buddy that has offered up his mtech2 bumper for a really good price. Just not sure if I should go that route or get a lip for this bumper. 

Was checking lights and such and found that my left running light in the rear is partially lit on the brakes even when the brakes aren't pressed. Through process of elimination using a socket from my sedan I found that it's the socket holder itself. Luckily a new OEM one was only 30 bucks plus some shipping. So that's on its way.

[Tkuhn]

Small update after the productive weekend.

Took the car for a drive down the street and everything seems good and normal like before. Speedo works correctly and that in itself makes me excited to no longer need to use a GPS Haha. 

Threw the quarter windows in after I took the pics on Saturday and on Sunday i put the grill in the front bumper. 

The car needs a solid wash, lots of dust from sitting in the garage.

[SteelBlue]

Are your mirrors Ganadors?