Steelblue E36 Build Thread
-
i actually fit pretty well. even had to put the seat up a little to be comfortable.
Sent from my SM-G955U using Tapatalk
I don’t believe it
Nice club though
-
Slight update. Bumper is at my buddy shop for paint. Wheels are getting Re-Powdercoated Kingsport Grey. Also by the end of next weekend Ill have a 95 m3 parts car for some goodies unless he flakes on me stuff will be forsale.
If you are buying that avus blue one in Minneapolis I'm interested in the aftermarket exhaust
-
Got my last package of Glass European headlights today! I ordered 2 sets. and A ZKW pair came and a Bosch set came. I decided to run the ZKWs because they will be better for HIDs and I gave my dad the Boschs for his 318ti.
Anyone have any recommendations for hid kits?
-
This might be a dumb question but are the bulb sockets all the same on the glass lights? I have Depo ones that came on my car, they have HIDs but can I just get a halogen bulb? I think they are maybe an H1? I'm clueless when it comes to lighting options.
Yeah you should just be able to pull the hids out and put halogen bulbs in. Unless the PO did something janky.
-
Yeah you should just be able to pull the hids out and put halogen bulbs in. Unless the PO did something janky.
Good to know, is H1 the right kind of bulb? It looks like its a bundle of plugs, it doesn't look like wiring is cut, looks like adapters that came with the HID kit or something.
-
Good to know, is H1 the right kind of bulb? It looks like its a bundle of plugs, it doesn't look like wiring is cut, looks like adapters that came with the HID kit or something.
Yeah H1s are your best bet
-
Don't cut anything. It's not that hard to get open. Are both latches stuck, cable broke? I have gotten e36 hoods open by pulling out a kidney grill and working on the latches through the hole.
Sadly I have done that. I have the kidney out bumper off hole cut in shroud. I have jiggled, pulled & WD40d almost everything. I even tried to unscrew the latch from the underside. Note it's only the passenger side that's stuck and It releases alittle but but not all the way.
-
You can pop out the driver side turn signal, grab the cable and pull on it to get it to pop. Taking the grills out doesn't give you the access you need. I have used a claw hammer to get grab the cable to pull on it for the leverage needed to do it.
-
I agree, you DO NOT need to cut anything. Its just finicking with various pics/screwdrivers/etc to release the latch.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
If it is just the right side latch that is stuck, you can just grab the cable that is between the latches through the kidney holes and pull it forward. Possibly pushing down on the hood above the latch to help it release if the tension is high. My cable is broken inside the car and that is how I get my hood open, janky I know but I have a ratchet strap as backup. It's super classy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login