Alpine White Zender Kit E24 633CSI

[Jdesign]

Quick update

I fixed a bunch of things in one quick swoop

• turn signals work again-AND much much better that they ever have. Turns out (pun intended) that all of the hazards switches I had were failing to contact pin 5 internally. I was able to fix all of them. Thanks @YoungCR for lending me another switch that lead to insanity and also a successful repair. you can have your switch back in NOW working condition too  I had an EE guy also BMW fan come over and we numbed our brains with liquor till we figured it out. 
• Gauges all work again. YUSSS.- I installed the new gears and cleaned everything up and blew it al out with compressed air.
• Reverse lights - they were not plugged in. I found out why, the wire sheething was wore where it passed through the tunnel to the switch fixed it and plugged them in. TA-DA!
• Fix all the dash vents and levers- They were stiff and dirty. constant dust came out when the heat or AC was on. I took all the vents out and cleaned them and lubed all the vent levers and cables.
• Sunroof - fabric was sagging. Took this apart and reattached the old fabric and cleaned all the parts and guides in the roof. 
• Fuel check- I installed a check valve in the fuel line because I was reading that the fuel pump has a check valve that fails and causes laggy starts because of fuel bleeding back into the tank. I ordered one and installed it. This wasn't the problem. I still have in-consistent starts so after a quick install I grabbed the Voltmeter and checked the in-line fuel pump. No power. So the car has been running of of the lift pump. I have since ordered a new pump and lower filter, as there are also two fuel filters on this car. I read that replacing this pump can cause almost and instant change in power deliver that you can feel. Hopefully this is the last of the repairs!

Once again, no pictures. I will share more once I install the new pump and filter.

[HipMF]

This morning one of my co-workers had to show me a pic of a cool BMW that was following him this morning. I was like, "Oh, that's Jason." 

[YoungCR]

You’ll have to show me how to rebuild the switches, glad it helped solve the problem.

[Jdesign]

HipMF said:

This morning one of my co-workers had to show me a pic of a cool BMW that was following him this morning. I was like, "Oh, that's Jason." 

I saw him actually. He was struggling to get a picture in his rear view mirror turning into the industrial park, then I could see him snapping away as I passed. 

YoungCR said:

You’ll have to show me how to rebuild the switches, glad it helped solve the problem.

It's super easy. I did the first switch, that's why they worked for a little while then went back to drive Jason insane mode. At that point Didn't realize that was the actual problem and I was afraid to break the contacts. Out of all 3 switches I have, each one is different internally as well. I will post some pictures of the insides and what fails and how to fix it for future reference.

[Jdesign]

Drove this two weekends ago to the last C&C and the weather was amazing. I invited my friend Andy to come meet me and shoot this car and the 2002. Here are a few of the shots he captured.

I intend to use these shots among the other 50+ he captured to list this car on BAT in the next coming weeks. I feel that the time I have spent bringing this car back and fixing its quirks were well worth it to me, and it's time to let someone else appreciate and enjoy it and at the same time give me more space to work on my E30. I have come to the realization that I will just continue fixing and improving this car if it sticks around as I have a hard time deeming anything "complete". If anyone is interested in purchasing the car before I list it, feel free to message me, I rather sell the car local to someone I know for less, than deal with listing fees and shipping.

[Jdesign]

This car has officially been accepted by BaT and will be listed in the coming weeks. I have been putting together all of the documentation and building the photo gallery. I am still open to local offers if anyone has interest.

[Jdesign]

Well... the pictures of the paint flaking off of front valance of this car were driving me nuts. Fed up, I decided to fix it and toss some paint on it. So far it's been sanded and the holes filled. I will paint it this week.

[Jdesign]

Paint is on and waiting to install!

Next I have a trick pinstripe kit I borrowed from a friend to refresh the worn striping. I will share with you guys how that goes in detail, it's pretty cool.

[Jdesign]

Pictures of it installed....

I decided to start painting and undercoating the the car since it was the last thing I haven't really cleaned up.

[straight6pwr]

looks great. when is BAT scheduled?

[Jdesign]

straight6pwr said:

looks great. when is BAT scheduled?

The listing is in the works. I just need to make a final approval and she hits the chopping block.

[Jdesign]

Its officially listed on Bringatrailer. Follow the link to see it live!

https://bringatrailer.com/listing/1984-bmw-633csi-12/

[jc43089]

Cool, watching!

[straight6pwr]

someone said:

Still waiting for the undercarriage photos …

lol so demanding

[Jdesign]

straight6pwr said:

lol so demanding

Well I did take an extra day to post them.

[Jdesign]

Well just for fun, here are some picture of the new pin stripes, underside, and some other photos of the car before we say farewell. 

[Rekpoint]

How easy was posting the car up on BAT? My dad and I are selling our 318ti in the spring and plan on posting it up there after we get it detailed and such.

[Jdesign]

Rekpoint said:

How easy was posting the car up on BAT? My dad and I are selling our 318ti in the spring and plan on posting it up there after we get it detailed and such. 

Pretty easy. They did mess out the content a few times so there were a few revisions before I gave it the thumbs up.

[Jdesign]

​

[Jdesign]

This is SOLD and leaving for New York tomorrow! Looks like I will need to update my Signature.