Build Thread?
-
-
I will be bringing the E back into the shop today/tomorrow and getting back to work on it.ย
Things to repair:ย
Oil Pan replacement
Rear Brake (parking brake grenaded?)
New rear brake lines (through the cabin/trans tunnel)
Re-Work the skid plateยI am going to be putting e46 control arms on the front of it, which will increase the track width more, and I currently barely clear the fender flares, so I will be widening the fenders for it. I look forward to seeing how that turns out, and deciding on how I truly want to go about it.ย
That being said, I could use a spare fender (DS) as the fender flare was pulled in an odd manor that may not clean up well.
-
E46 (aluminum) control arms scare me for offroad type stuff
I agree with you, especially considering I will probably use the cheapest ones I can find.
I think I saw some that were steel that may be better suited. -
I got an alignment on the E30, so that's a thing I guess?
I also swapped the cluster gears so I can see how much I don't actually drive it and use that as motivation to drive it more.
Front toe was set with a tiny bit of toe out, I like the way that feels thus far! -
Ha, no alignment on that yet.
I need to investigate the extent of that "crack" -
After getting my car aligned it was a night and day difference!
-
Alignment numbers came back pretty good, though I think I may have bent a control arm a touch. The caster from side to side had about a .75 degree difference. ย Not too big of a deal.
Car was set with .01 degree toe out, and it is interesting for sure!
Rear camber came in at about 2.5 degrees, so I may be doing subframe riser bushings this winter to get a bit more tire on the ground. This will be especially necessary if I run wider tires. -
I did a thing the other day. Proof.
-
I did a thing the other day. Proof.
I witnessed it. It was awesome.
-
I added some oil yesterday.ย
Yep.Looking forward to tearing into this car again and slapping the snail back on!
-
I like your new signature.
-
I like your new signature.
Thanks, I quite enjoy it as well. The last one was a bit outdated.ย
I was looking through all of the pictures that you have taken of my car, they are all excellent. -
yeah great photo. i particularly like the reasonable ride height.
Dan
-
Shock suggestions?
I found that this thing squats hard under accel, and I know the spring rates are very reasonable for what I do with the car.
I am currently running H&R Race springs with Bilstein sport shocks/struts.ย
I know that the shocks/struts are not new by any means, but I know that Dan said he was much more satisfied with other solutions.
So what should I look into? Koni SA? I see that most distributors are having a sale on Konis, so I am tempted to grab a pair of rears to get started....
-
Are you trying to avoid coilovers?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login