Build Thread?
-
Quick mock up, followed by the good stuff!
Nice fit, but the valance needs work!
Started off with some smaller cuts
Made a few extra cuts for better flow,
ended up with that!
Fits very well!
And just to see what it would look like all tucked in there!
I quite like it!
-
28x9x2.75
Not being able to get a bumper off sucks, and any other way sucks hardcore.
Take off the bumper skin yet?
-
Any thicker and I wouldn't be able to run a bumper or valance lol
-
It will fit, its just going to take a bit of massaging of the valence. Get out the grinder!
Sent from the future. Or my phone, who knows.
-
I can't stand it in front of the valence! It's all about the stealth.
Sent from the future. Or my phone, who knows.
-
Tis the plan!
Sent from the future. Or my phone, who knows.
-
Looks great Ben. Can't wait for this to be finished up so we can boost around together.
-
I like!!! Keep it up!
Just a heads up that I will hopefully be copying you so hard with the intercooler placement/size.
Ā Ā Ā Ā @DrLeadFoot
-
good deal!
its a snug fit!
-
In lieu of having a snow day I decided to do some work!
Started off by fabing up a intercooler mount, it is a bolt on piece because I didn't want to weld onto the body for it, and it actually ended up being easier to mount it this way!
Looks simple but silly things like that take a long time to make! Will be painting all of it soon.
Then took out my windshield because I had some bubbling under the paint on the drivers side A pillar, which was really bothering me. I have never taken out a windshield before, but dang is it easy!
Was greeted by this!
Nice hole, and the bubbling is all still in there....
And then on the passenger side there was a bit of bubbling going on. It didn't look too bad, but wrong again!
I think I will be cutting these pieces out of good shells and welding them into the car, so I needed to do one more thing to ensure that it would be easy.
Bye Bye dash! Actually wasn't too bad to take out!
And here is another shot of the A pillar rust, from an odd angle of course!
More to come!
-
You don't understand how happy I am that you're doing things the right way. I regret tearing my car apart this summer and not tackling the things that really bothered me.
-
Thanks bud! I couldn't stand to leave rust there it would have killed me.
I wish you would have been a tad more careful with your car too
-
So got around to a bit of playing today, back when I had planned on the v8 I started to cut off brackets and other little stuff in the bay to clean it up a bit. Well now I wish I hadn't but oh well.
I was planning on just taking care of the spots I left with touch up paint from paintscratch but I have a bit to cover... and the engine bay is not body color (aftermarket respray on the outside, paint came back as tomato red which is a newer vw color lol)
But after bouncing ideas around with my pops I decided to just spray the whole bay in a single stage, so I will probably leave it how it is for now and do some putty in it to make everything smooth again, but then wait till it gets warmer out and just spray it!
That was after some masking and priming, kind of gives an idea of how much stuff is ground down.
And scraped more paint off the A-pillar
Plans for that so far is to cut it all out and jb weld/ weld patches in from the inside and then body putty the difference.
S'all for now folks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login