Turbo m52 obd2
-
Well from what I have gathered the rims where made in the same place as Mille miglia, unless they are fakes but they say made in Italy and Fomb which is the place that makes Mille miglia.
Pretty sure thats what they are. My friend has the same set. 16's?
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Billet fuel rail with dual feed, some part porn.
Im going to be running two 6an fuel lines powered by this pump, any objections?? http://www.highflowfuel.com/i-10388151-walbro-f90000267-450lph-e85-compatible-intank-fuel-pump-with-installation-kit-and-strainer.html?ref=search:http%3A%2F%2Fwww.highflowfuel.com%2Fsearch.html%3Fq%3Df90000267&gclid=Cj0KEQiA39_BBRD0w-_rmOrc__8BEiQA-ETxXQhxxIQt_aEqcC9DwHs37k5iKDXn05HqBy12-Tdp10kaAhxA8P8HAQ
I couldn't find much in searching do you think the return should come out of the end or center to create best flow for all injectors.
-
Shiny!
That fuel pump is about 3x more than you need for your current power levels, so it should work just fine!Any big plans for it now that we are back in "build season"?
-
Well the egay turblow is making noises like a supercharger so that has to go, I have a gt35 that I rebuilt ready to go in with 60 lb injectors, and a homemade meth kit that I put together for around 100 dollars. The plan is to run pump gas and hit 500 whp by the spring. Then once I want more switch to bigger injectors and e85.
-
What will you be doing for tuning?
Maybe the turbo is just morphing into a supercharger!
-
Tuning stock ecu with the help of an Aussie buddy.
Maybe the turbo is just morphing into a supercharger!
That is a possibility.
-
Check out this awesome vid bro dawgs
https://m.youtube.com/watch?v=l1baO6ywpuw
Can't wait to smoke you guys out on the cruise.
-
I like this car
Are you able to give yourself a warning?
Because you just said you like a 24v thing. That's not okay.
-
Snap said:
I like this car
Are you able to give yourself a warning?
Because you just said you like a 24v thing. That's not okay.
24 valves are wonderful, my friend!
Just please spare me the typical r3vlimited square-jerk where a neglected M20B25 gets replaced with a junkyard M50 Non-Vamos and the thread continues with a tirade of "f*** timing belts and valve adjustments"
-
24 valves are wonderful, my friend!
...
"f*** timing belts and valve adjustments"
Snap I think someone might have slipped you something, you're talking crazy talk
-
Rerouted the scavenger pump
rolled a bead around some intercooler piping that didn't have it, found about 12oz of oil in the piping courtesy of premier auto glass. Emptied that out and hoping my car isn't in the vape championships this year.
remounting the gauges where the radio goes and putting that under the obc. Anybody know where I can get a gauge plate, bezel, insert or whatever you want to call it locally?
-
Rerouted the scavenger pump
rolled a bead around some intercooler piping that didn't have it, found about 12oz of oil in the piping courtesy of premier auto glass. Emptied that out and hoping my car isn't in the vape championships this year.
remounting the gauges where the radio goes and putting that under the obc. Anybody know where I can get a gauge plate, bezel, insert or whatever you want to call it locally?
Proper front plate mounting spotted!
-
I could make one if you'd like. Are you wanting a filler for that whole panel?
http://www.hardmotorsport.com/hard-motorsport-complete-dash-block-off-panel-kit-bmw-e36/
No just where the radio goes. The car still has ac so don't want to get rid of the main vents.
How much money are we talking?
-
Did stuff....
Unstuck driver door lock, the spring for the tumbler was siezed. All juiced up now and working like new. Rear window has been off track since I bought it. Held itself up and busy getting it drivable, but got to it finally. PO gave me a regulator with it but it turned out to be missing the spring clip for the plastic slide. Luckily I found an extra in the front door and got rid of the rattle when I close the door. Also didn't break any clips taking the panels off.
Got some switches ready to go.
Decided I want to relocate the obc to where the ash tray is in the center console.
also found a quarter
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login