UltraGauge?
-
So I recently found out about the UltraGauge, it basically plugs into your OBD2 port and displays all sorts of information from there like actual engine coolant temps, intake air temps, AFR, etc. It can also read and clear CEL codes and you can set alarms for all the gauges if the numbers fall outside a certain range (engine temps anyone?).
http://www.ultra-gauge.com/ultragauge/
Best part is its only like $80 which is a steal compared to the alternatives. Anyone have any experience with one of these? They seem pretty useful
-
Seems like a good solution. I have a Bluetooth obd2 adapter that works with apps on my phone. A permanent device would be much more convenient. It will have a bit of a delay to respond because of the communication protocol but I was seeing around 300ms response time with Bluetooth one. I think mine is an obdlink mx which is a higher end one.
Sent from my 831C using Tapatalk
-
I have a Bluetooth adapter and Torque app on an old phone mounted to the dash so that I don't have to take it out. I hardwired a charger and routed the wire to come out of the corner of the dash to power it. Total cost including the mount, charger, adapter, and app was $30.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login