Reverse Bleeding
-
I'd suggest a plastic machine oil can as my metal one I first used rusted shut. Whatever clear vinyl tubing size they have at the hardware store too that fits snug on a bleeder screw and the nozzle.
If metal -Try to get one that isn't coated/painted red like the one above. The brake fluid will eat away at the cheap Chinese paint and it'll flake into the fluid (like mine did).
I tried the reverse bleed when doing my clutch slave and couldn't get the right combo of nozzle/hose to seal tight enough.... So bled it with vacuum bleeder.
-
I will have to bench bleed slave then bleed some more once I get the crap in the car. I'm not looking forward to that portion of the install.
-
my pedal sinks about 1/4 the way when I start the car. My booster was great before, and I replaced the check valve, and the calipers bleed great, and the pedal is hard when the car isn't on. My abs still works, though, as I tested it..
If I bring the pedal up when the car is running, it rolls just fine. When I push it down, they stick down a little.
Your pedal is supposed to sink after you start the car, especially if you built pressure in the pedal before starting it.
-
my pedal sinks about 1/4 the way when I start the car. My booster was great before, and I replaced the check valve, and the calipers bleed great, and the pedal is hard when the car isn't on. My abs still works, though, as I tested it..
If I bring the pedal up when the car is running, it rolls just fine. When I push it down, they stick down a little.
Your pedal is supposed to sink after you start the car, especially if you built pressure in the pedal before starting it.
Is it supposed to sink a bit and stay? The brakes stick a bit unless I pull the pedal back up.
Sent from my iPhone using Tapatalk
sk8 or die
-
It is supposed to sink and stay after you start the car. If your pedal is physically sticking then it is something mechanical between the master and the pedal. If you had sticking calipers but the pedal didn't stick then it would be something after the master most likely.
-
It is supposed to sink and stay after you start the car. If your pedal is physically sticking then it is something mechanical between the master and the pedal. If you had sticking calipers but the pedal didn't stick then it would be something after the master most likely.
such as my ABS system?
sk8 or die
-
No. Your abs wouldnt cause the issue. Thats a hydraulic piece that wouldnt hold your pedal.
-
Hmm so any ideas? Where would you start. Sent from my iPhone using Tapatalk
PM'd to prevent further thread jacking.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login