1993 e36 turbo stroker long term project
-
im not sure on cams i wondering if i could get them reground to work well with the turbo?!?!? if not I'm really not sure on cams they're really expensive and are probably outside my price range currently...
current important parts i need are a turbo exhaust manifold t4 preferably twin scroll cuz i got an hx45w for next to nothing in pretty good condition. intercooler thinking about going water to air but not entirely sure, need to swap the trans.
also need to get crank bearings, new piston rings, maybe electric fan setup since the motor will be out should i do new engine mounts too??
If anyones got a flywheel i have a clutch and also need the shift linkage for the swap i have everything else.
and i think thats about it.... i think i have most everything like piping and what not,
-
That was my reason for going with the m54b30 intake cam, they can be found for very cheap, like under a hundred dollars. 9.8mm lift vs 9mm and the duration is longer but I forget the numbers, not quite as aggressive as an s5x cam profile but close. The only modification to fit is shortening the vanos spline parts to match the length of the original.
-
Don't get too fancy with the cams until you get the rest of your setup dial IMO. What will you be doing for tuning? The most important step by far, but you know that.
Good choice in turbo. But I'm sure its not an hx45 haha.
Thats an hx40 with an obx manifold which is t4. The turbo position will be slightly lower because I was running a t3/t4 adapter. This manifold is for sale by the way. Many people have made great power on them, and they are great for the price. I'm assuming you want top mount? I Don't really think its an option for bottom mount, because its kind of tight with that turbo.
LMK if you want the manifold. Its brand new, only used for mockup.
Oh, I also have some brand new motor mounts. They are AKG red, and one of them is the "turbo" motor mount for extra clearance or whatever.
Good luck man!
sk8 or die
-
You can definitely tune the stock ecu, which is a very reliable and easy solution, but it is expensive. Like 1000$ for injectors, maf, and chip.
Otherwise you can use a chip burner or a emulator(ostrich 2.0 is what I have) and real time tune the stock ecu using tunerproRT and some sort of datalogging(and wideband)
Otherwise megasquirt is your best cheap standalone and a few of us have experience with it.
sk8 or die
-
well currently after picking up the m54b30 rotating assembly any offer that i have the cash for would be an insult so i'd rather wait till i have enough cash to make a respectable offer.....
also does anyone think i'd be able to reuse the piston rings they have 70k on them.... i was thinking i should just replace them cuz every things out, but if i burn them up i wouldn't feel bad tearing the motor down again... just trying to have the car driving with maybe 10lbs of boost by the time automation rolls around. one bearing on the crank isn't smooth like the rest so i'll be doing crank and rod bearings already......
-
I would think you will want new rings, they seat to the cylinder walls during break in and this happened in a different block. Might have increased oil usage, no need to build it twice and pay for 2 sets of gaskets, head bolts, main cap bolts etc.
Sent from my potato phone
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login