The E46 M3 Journal
-
Squeaks and thuds/rattling until they warm up and quiet down. The recurring maintenance to grease them is what I'm not excited about. Back to stock but will clock them correctly for the lowered suspension.
@DrLeadFoot
-
You probably said it earlier but what brand? I haven't had to re-grease mine in a couple years. Are you sure the rattling isn't something else? They should be tight enough that the poly stays tight in the trailing arm and the only movement is the sleeve turning in the poly. I have seen some other designs that have an insert with a spherical bearing which is smart because it isn't completely a 1 dimensional movement at that joint.
-
-
Oil and filter change. LM 10w60 & mann filter.
Added some new pilot sports 4S in the rears mid summer. Put a lot of miles in this thing while the wagon was under the knife. Love this car!!
@DrLeadFoot
-
M3 time!!
New cross drilled and slotted CSL front rotors, crossed drilled and slotted rear rotors, new front PFC pads, pulled poly RTABS and replaced with OEM BMW, alignment, avant radio installed and driver's side ignitor.
@DrLeadFoot
-
Wow, I had dismissed the Avant head unit figuring it was just another android auto type touchscreen radio, all of which are neat but not a huge advantage over a phone and an aux input cable. Seeing how that has the OBC built in is really cool! The stock nav system/radio feels like something out of a prototype car. Half of the buttons don’t do anything, and whatever functionality remains is pretty limited.
-
Looking very nice
-
Android auto and Apple Carplay are worth it. I'm tempted to update my HU in the M3 just to have that. It's so nice to have in my truck!
-
I've been very interested in those head units for cars I don't have
seems like a great way to modernize the car while appearing stock. What was your complaint with the poly Rtabs?
They were just too loud. I'm going to stock shock mounts as well. Thing sounds like it is rattling loose when it is super cold out.
@DrLeadFoot
-
-
Chasing a rough idle so I got my injectors flowed and cleaned. They are flowing great and I threw in some new filter baskets while I had them out. Didn't solve the problem. Next up is cleaning the ICV & throttle bodies.
Installed some 2006 M6 heated front seats. Need to wire up the new-to-me heated seat buttons and then I'm golden! The M3 will see some winter duty while the wagon is under the knife
@DrLeadFoot
-
Chasing a rough idle so I got my injectors flowed and cleaned. They are flowing great and I threw in some new filter baskets while I had them out. Didn't solve the problem. Next up is cleaning the ICV & throttle bodies.
Installed some 2006 M6 heated front seats. Need to wire up the new-to-me heated seat buttons and then I'm golden! The M3 will see some winter duty while the wagon is under the knife
I can’t believe those fit in the backseat of the M3 lol. Those are going to be such a sweet upgrade going into winter, nice find!
-
So rough idle was due to a bad serpentine belt. A new belt, fan and fan clutch later I was back on the road!
Mike installed new control arms, poly lollipops, new inner & outer tierods, power steering line, new steering wheel, wired up heated seats, new head light adjuster & mount and getting an alignment tomorrow.
@DrLeadFoot
-
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login