The E46 M3 Journal
-
Drive it to a shop... Not a show! Lol.
I rage drifted my E30 M3 into a curb. Trying to keep this one between the lines.
Tied up with work lately but mid next week I'll run the program as many times as I can while I excavate items from my garage and try to find an E30 that I know is in there somewhere.
@DrLeadFoot
-
Ran the program and couple of more times while I was cleaning out the garage.
It still "cannot find the center of the shift path."
I'm leaning towards taking it to the dealer and just get it fixed. Maybe their software is better than the Windows XP laptop I have.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
No shame in taking to a shop. Your time is worth more than the frustration of fucking with this.
-
Pat is right. At some point there is enormous diminishing return on your time being sunk into this.
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MR
2003 E39 M5
2002 E46 M3
2021 X5 40i -
Thanks for the support guys!
Update: The tech feels that it might have something to do with the shift pin plug in replaced. Maybe it is in there sideways.
I told him to do whatever it needs as I just want to go 150mph asap.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
rofl @ 150mph asap. no one was surprised when they read that
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MR
2003 E39 M5
2002 E46 M3
2021 X5 40i -
Haha
Update:
The part #5 is a plug and the new one the make doesn't fit as snug as the original one does. The tech took a pick and with barely any force popped off the plug.
I replaced the spring but not the roller inside the trans. He pulled that out and it was at 3 o'clock instead of 12 o'clock where it should have been. Maybe this is it!!
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Before all this is did actually drive the car to the dealership. Also got the rear end loose when I saw a buddy going the opposite way.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Hahaha, of course you did!
-
She is all good!!! The actuator was bent. Getting a new bumper painted and installed now.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Ragedrifting caused it
-
Great to hear!!!
Sent from my SM-G930R4 using Tapatalk
-
Excellent!
-
Thanks guys! It's soo good to have it back. The body shop is booked up but I should have it back next week. Getting new plastic parts to replace the broken ones where needed on the underside. Excited to get this back to 100%
I feel the loss of compression was gradual as the car smelled super rich for the longest time. It was dumping fuel to make up for the drop of compression. I feel it was just beat on super hard from day 1. I know I was everything but kind to that motor.
Next phase is a new coil over set up. I like the low look but I need a quality but sporty ride. What is a good choice? Any suggestions would be very helpful.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Thanks guys! It's soo good to have it back. The body shop is booked up but I should have it back next week. Getting new plastic parts to replace the broken ones where needed on the underside. Excited to get this back to 100%
I feel the loss of compression was gradual as the car smelled super rich for the longest time. It was dumping fuel to make up for the drop of compression. I feel it was just beat on super hard from day 1. I know I was everything but kind to that motor.
Next phase is a new coil over set up. I like the low look but I need a quality but sporty ride. What is a good choice? Any suggestions would be very helpful.
Sent from my SM-G935V using Tapatalk
KW Street Comforts have been getting great reviews but I don't think they're available on the e46 M3 yet. ST's are a great choice and have a rebate going on right now. The XTA is a fully adjustable version of their ST X. BC get's great reviews as well and are more budget minded than the ST's while still being fully adjustable. Only issue with BC is they are all custom so it typically takes 3-4 weeks to get a set.
-
I feel like most custom rate coilovers take 3/4 weeks, I Could be wrong. I have fortunes coming for the e30 because Enjuku/BC shipped my shit to Texas.
I went thru endless autosport & got custom rates. He was one of the cheapest vendors I could get a hold of for fortunes
-
Hallway Pat and I are talking and we are thinking the XTA's are the way to go.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login