Jake's Epic BMW 135i Build Thread! (5+ Years of Ownership)
-
Why is there a white pixel in the middle of the screen through most of the vid?
0:46 - to next clip
5:55 - 7:28I like the black handprint on the b pillar at 9:47
Too much talking, not enough burnouts or pulls
-
Why is there a white pixel in the middle of the screen through most of the vid?
0:46 - to next clip
5:55 - 7:28I like the black handprint on the b pillar at 9:47
Too much talking, not enough burnouts or pulls
There has been a white pixel in the middle of the screen for almost all of my videos. Something between my camera and lens, dead pixel or something.
Didn't see the blank handprint you're talking about, but I know there was one in my 135i. Good call on the talking vs. car stuff. I think I need to shorten these videos up and include more action again.
-
Here is some video content for you guys!
And a few recent pictures...
-
your video production is excellent, and thank god someone who knows wtf they are talking about is making videos for the masses.
however, i beg you to please stop with the click-baity titles and video stills. just say what is in the video! you know why I don't like it? it wastes my time. i have to watch part of the video to figure out wtf youre going on about. it would be nice to know before i click and not waste my time. it makes me want to punch you in the face. and you're a nice guy, so, I feel guilty about that. but the urge is still there. you don't do it every time, but you are creepin into that zone.
For instance:
"The BEST Thing About BMW's in the WINTER! Do you have it?!one1OMG! "
RWD? Traction control? Heated seats? WTF are you talking about?
Instead try:
The rest button feature of my BMW: things are going to get heated
In summary:
Dont be click-bait Jake.
/rant
Dan
-
your video production is excellent, and thank god someone who knows wtf they are talking about is making videos for the masses.
however, i beg you to please stop with the click-baity titles and video stills. just say what is in the video! you know why I don't like it? it wastes my time. i have to watch part of the video to figure out wtf youre going on about. it would be nice to know before i click and not waste my time. it makes me want to punch you in the face. and you're a nice guy, so, I feel guilty about that. but the urge is still there. you don't do it every time, but you are creepin into that zone.
For instance:
"The BEST Thing About BMW's in the WINTER! Do you have it?!one1OMG! "
RWD? Traction control? Heated seats? WTF are you talking about?
Instead try:
The rest button feature of my BMW: things are going to get heated
In summary:
Dont be click-bait Jake.
/rant
Have you read my username title?
I will admit the winter BMW feature video was a stretch. I don't think the video I just posted was clickbaity at all though.
-
Have you read my username title?
I will admit the winter BMW feature video was a stretch. I don't think the video I just posted was clickbaity at all though.
lol, glad you see it. the one you just posted certainly wasn't.
Dan
-
Gotta play the content game if you want to succeed. You have to give someone a reason to click if you want them to even think about watching your video. With how many people are in the YouTube realm now and with how much content there is out there, you have to do what you have do. Pretty much all content creator driven channels do it, even the big ones. With only one platform with that has the user base (YouTube), you have to play the game and the cards that are given to you. If you make good content, everything else falls by the wayside as you grow a following, including clickbait titles.
-
-
When's the closed deck happening? 1,000whp or bust!
-
what are the benefits of the intake?
I was told it looks cool
-
what are the benefits of the intake?
I would hope it eliminates the sandwiched port injection plate by having injector bungs in the runners.
If I'm wrong it would seem like a very large cost for a bit more hp assuming the flow rates were compared with stock.It would be interesting to see a dyno chart with the same car only controlled variable being the intake.
-
When is the dyno day?
I have a few things to tidy up (and the weather hasn't been helping) before the dyno. But I'm going to be scheduling something in May. There is a performance shop right down the road from me that is installing a Mustang dyno right now. I'm hoping they finish before May, otherwise I will take it down to Late Model Throttle.
what are the benefits of the intake?
Elimination of the sandwich port injection plate I'm currently using. So less potential leaking surfaces. And it has been shown to pick up 23whp and 16wtq at 18psi with no other changes. I plan on running 26-30psi, so the gains should be even better.
Two less important factors: it won't blow up. Some people with port injection have blow up the plastic manifold between shifts on a manual trans. And... it looks cool!
When's the closed deck happening? 1,000whp or bust!
We'll see how long this current motor lasts. I still have my old one I'd like to build!
I was told it looks cool
It does.
I would hope it eliminates the sandwiched port injection plate by having injector bungs in the runners.
If I'm wrong it would seem like a very large cost for a bit more hp assuming the flow rates were compared with stock.It would be interesting to see a dyno chart with the same car only controlled variable being the intake.
There is a dyno chart, but it's hard to dissect exactly what's going on: https://bmw.spoolstreet.com/attachments/file-jun-23-8-29-40-pm-jpg.7/
It did pick up 23whp and 16wtq at 18psi, and eliminates the port injection plate.
-
This intake reminds me of the HPF intake on the s54's.
-
The car is currently at Legend Auto in Dale, Wisconsin getting a custom exhaust fabbed up! They've treated me very well and have been great to work with. Would highly recommend them for any fabrication or automotive installation needs!
Teaser pics:
-
The car is currently at Legend Auto in Dale, Wisconsin getting a custom exhaust fabbed up! They've treated me very well and have been great to work with. Would highly recommend them for any fabrication or automotive installation needs!
Teaser pics:
that looks weld-done
Dan
-
There is a dyno chart, but it's hard to dissect exactly what's going on: https://bmw.spoolstreet.com/attachments/file-jun-23-8-29-40-pm-jpg.7/
It did pick up 23whp and 16wtq at 18psi, and eliminates the port injection plate.
If I had to take a guess it would confirm my thoughts of more HP with less bottom end torque. Not a massive difference in the bottom end which is cool.
It does indeed look like the HPF manifold.
Bring on the boost!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login