My new 1995 540i/6
-
It is in the beginning of the never ending story
Is that in Genesis or Exodus?
-
Finally getting around to doing a little work on my car this weekend. I plan on doing some prep work for rebuilding the rear calipers and maybe even taking the exhaust off. Worst comes to worst and I'll start refinishing the wheels. I'm really excited to start getting some work done though
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Are you coming to the october port washington meet sponsored by the former owner of a canadian and euro e30s
Unfortunately no I won't be able to make it. I'm at school right now in South Carolina so I won't be back up north till this winter. I'm trying to find some meets to go to around here but the carloinaeuros forum I tried getting into has been dead for months so I'll have to try some other sites. Hard to find forums as great as wibimmers.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Last weekend was not as productive as I wanted but when do you ever get as much done as you want to. I did find rebuilt calipers at AutoZone for $45 after core charge which is pretty sweet. Also a bud of mine down here told me about a shop that he goes to so I'm hoping to get over there this weekend and figure some stuff out, possibly drop my car off for them to do the drive line stuff for me. I don't really have the capabilities down here anyways. I did get started on my wheels though!
As you can tell I didn't get very far but I know how it all works now so the rest of the wheels shouldn't take long at all to take apart and wash up. I'm using this DIY I found http://forums.bimmerforums.com/forum/showthread.php?1156455-*DIY-Refinishing-style-5-s-BIG-pictures. It's going to take a while to get them really nice but it will be worth it. I was thinking about getting the centers powder coated gun metal grey, what do you guys think?
Hopefully I'll get a little more done this weekend and possibly get my car to that shop but you never know.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
I'm excited to see those get finished! I think the gun metal powder would look great!
-
I also enjoy the gun metal faces, but I am biased from my old set.
TJ sprayed the faces OEM Arctic Grey before I got them from the guy he sold them to
What color are your bolts in those pictures? I can't tell if they are a bronze or copper. Those wheels look great! I may think about doing something like that then.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
This is kinda far off in the process but do you know if I could get the centers powered coated at any old paint shop? or is it normally a specialty place? Also Chris suggested me getting the bolts zinc coated, do you know anything about that?
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Powdercoating can be done by anyone who has the equipment. I doubt a paint shop would have a setup. You could also just have them painted professionally. You can't powdercoat the centercaps so if you get the faces powdercoated, you will need to find a matching paint for those.
You could get your old bolts zinc coated but it depends on the pricing.
-
Well those gold bolts are $160 for 120 of them so I'll have to find something more cost effective. I soaked the bolts in vinegar to get the corrosion off and I'm going to use a wire wheel and drill to really get them clean. I'm sure I could get paint them myself but the paint probably wouldn't last to long so I need to figure out some way to do that. So what I'm thinking is refinish the faces to give them a nice shine, paint the centers gun metal grey, and get my bolts gold somehow.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
I got a little done on my car this week, I had dropped her off at a shop last Sunday to get the drive shaft work done. Picked her up this Wednesday and the guy who did the work told me the brakes had seized up bad. I somehow got her back to my grandparents place (brakes a smoking) and proceeded to order new calipers for the front. I started on the job last night, got the calipers off easy but the rotors and mounting bracket nuts would not budge.
So I slept on it and picked up a blow torch this morning and gave it another go but still got no where. I decided to just try putting on the new calipers and just see what happens.
I got the new calipers on and started to bleed the brakes and the bleeder screw on the rear passenger caliper decided to break clear off. Looks like I get to replace those one too. Maybe I can get it done next weekend but you never know. At least I finally got a chance to give her a good washing.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Finally got the car rolling last night! I threw on the back calipers and bled the brakes. Everything seemed to be in working order so I drove her back to school. I can't tell if the problems are completely fixed, there are is some noises the car still makes but they were probably there before and I'm not used to them. Maybe the new parts just need to be broken in a little, who knows. I can look into it some more this winter when I have time and money. At least I have my baby back for now at least.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login