ClassE 1989 325IS Build Thread
-
I could lie and say a big cam'd ITB'd M20 hasn't been in my head lately. I certainly haven't been looking at the stroker kits and cams available.
Only time will tell - but at the very least it'll get an exhaust, intake, and chip to open up the car alittle bit. It feels like the engine is getting "choked out" at higher RPMs (like it's really working to pull in air).
-
All textured black? Sounds like someone I know=D
HEY-O!!!
I could lie and say a big cam'd ITB'd M20 hasn't been in my head lately. I certainly haven't been looking at the stroker kits and cams available.
Only time will tell - but at the very least it'll get an exhaust, intake, and chip to open up the car alittle bit. It feels like the engine is getting "choked out" at higher RPMs (like it's really working to pull in air).
For sure. Driving a stock car is the BOTS. (back of the sack).
I am strongly recommending condor speed shop bushings. I like mine a lot.
@DrLeadFoot
-
All textured black? Sounds like someone I know=D
Bah - I'm only worried about duplicating cars that will be done next summer.
It's all bout dat zink doe.
-
Measurements taken, and template made. He's gonna make up a prototype and bring it down once it's done. Not sure of a timeline, but I'm in no hurry....
I've got my eyes on this Condor Speed Shop kit:
... And think I've worked a deal for some new rollers. 3-piece and plenty rare - hesitant to pull the trigger tho because I'm alittle worried about finding parts for them. One will be here Saturday tho for a test fit and I'll decide from there!
Pics to come!
-
Stainless isnt worth it for the headache of getting the right bolts and then the total cost. I wish I had a zinc guy. Let me know how he works out=) Did that plate get fabbed and installed the other day or were measurements just taken?
Once I get test pieces I'll post more info, but since the business is local to me I can help coordinate if people are interested in getting pieces done.
-
Once I get test pieces I'll post more info, but since the business is local to me I can help coordinate if people are interested in getting pieces done.
If be interested in this too for down the road!
-
Had 1 of these sent to me to decide if I want them - and to check out sizing and offsets. More to report back tomorrow....
Step up! Those look great.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
-
Had 1 of these sent to me to decide if I want them - and to check out sizing and offsets. More to report back tomorrow....
Damn, those look nice
-
Hopefully the next couple weeks aren't too busy where I can get a lot done!
Did a quick test fit last night.... Wasn't quite where I thought they'd sit (I had measured these at about ET20 so was expecting a pinch more "tuck").
The original plan was to fill-and-redrill centers and swap the existing 1.5" lips for 3.00" lips. After the test fit though, I'm comfortable with 1" more lip.... Any more I think I'll have too much poke/camber to fit "perfect".
So looking at running 1" adapters (keeping current lips) and swapping barrels out for 1.5" larger. I found a guy last night in Canada with a set of barrels, just awaiting pics and pricing.
Should get me a 16"x9" all around, and have some "play" in the offsets using adapters. I'll have to wait and see on those barrels before making any decisions.... Onto the pics!
-
Was in Milwaukee this weekend for a Christmas Party, and picked these up for a staggering $66 for the pair. I dont have the extra project money this winter to reupholster the original sport seats or get aftermarket seats - so these will work for one summer. A big thanks to xXxGOODKILLAxXx for the referral and info!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login