First venture into the world of BMW's, lots of E30 questions:
-
I would take you up on that - but just arranged to have one delivered from Minnesota for $85!!!
Just got into garage, gonna finish up timing belt install and work on reassembly. Then it's just oil change, fuel filter, plugs and start it up!!!
If all goes right, I'll make my paint appointment on Monday!
-
^ I like how fast you work!!
-
I've got a LONG list for this winter.
Cam seals and timing belt swap DONE. Started reassembly and called it a night cause work is going to come early tomorrow.
How we left it, finish reassembly tomorrow night - oil change - fuel filter - and *hopefully* take it for a spin!
-
Fender will be here at noon tomorrow (how's that for shipping huh!), which means I should have all of the body stuff I need to make the paint shop Monday. Only thing I need is to make sure my guy with the fender roller can make it Saturday to roll the hell outta these fenders!
-
I'm also whipping through this pretty quick, knowing it's all coming back apart in a month or two anyways. M20 is only staying in this car for this next summer, but I'm still gonna pull everything apart and have it sandblasted/zinc coated/powder coated.
I have every intention of driving it this weekend for a bit, maybe even tonight if reassembly goes well. Acouple questions:
-Fuel filter: I'm assuming it's an inline filter under the car just forward of either the drivers or passengers rear tire? Standard issues "bung-in bung-out" filter or anything I should know?
-I haven't picked up a Bentely yet for this car, anyone have suggestions on an appropriate oil weight to run in this car?
-I have never owned a car that needed a valve adjustments (does an M20 have solid lifters - hence the need to adjust?). Any harm in driving the car if it hasn't had an adjustment in years? What should I listen for?
Hopefully gonna have it all buttoned up tonight!
-
Answers to your questions:
inline fuel filter, bung-in, bung-out design
oil weight, if not driving in winter, standards 10w30
valve adjustments usually only stay "adjusted" for a few weeks, then will slowly settle back into it's prior state. Kinda weird. My M30 does it as well!
-
Oil and the m20 is a topic with everyone having their preferences. Bentley recs are 20-50 summer and lighter for winter 10/15-40 or lower bracket depending on how cold. Some folks argue that the Bentley was written before the modern synth oils so is out of date which leads to more recommendations.
My SpecE30 track car likes 20-50 dino, nothing burned no leaks happy car. Too much syrup for winter though. Tried a lighter synth (5-30?) when I first got the car and even with replaced seals leaked all over the place. Cheap horsepower though for some front pack is to run a lighter weight and pour in the quarts between sessions as it burns off.
-
I'd like to do one at some point before spring - if nothing else just to better understand the engine. If I'm not in danger of harming anything, I won't do it before theirs snow on the ground.
Paint shop on Monday, then try to get a week or two of driving it in before theirs snow on the ground..... Then the REAL fun begins!
-
My suggestion for an M20 based on the temperature chart in the owners manual is
20w-50 summer
10w-40 winter
I just buy the cheapest 10w-40 (just in case I absolutely HAVE to run the car) for storing my car over winter
Valve lash that is too loose can increase the chances of a broken rocker.
Too tight on the exhaust side can cause burnt valvesI am wanting to try out 0.008" on the intake side for a bit more performance and a little less noise but just haven't yet. Maybe you could be the guinnea pig
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login