E28 SETA Build

[jc43089]

Get me an extra red one, I will pay you back.  I only got one and I want one on both sides.

[RamRod E28]

MASSIVE UPDATE thingy.... so Mr. Menard and I did some major work on the e28 we got the engine and trans out of the blue e28 but it was easier said than done lol. It was a ton more easier to pull the engine out of the parts car due to it having no front end on it and i didn't care if it got banged up or not. here are some pics for your viewing pleasure...

Here she is parked in front of her new heart and soul a 88 super eta i cant wait to see what the higher rev limiter and extra 6hp feel like!!!

Some bay shots before we pulled the engine

Dr. Menard evil bmw scientist lol

Right after this photo was taken I had to get the car off the stands and my jack decided to not wanna lower with the handle so I had to get under the car while it was teetering off only the jack to lower it down nothing like a situation like that to get your adrenaline pumping!

For sale 84 bmw m20b28 eta with 184k on it comes with harness and motronic 1.0 ecu!!! (cough... snap)

Such a big ass engine bay

I couldn't resist...

With the engine out she was sitting at stock height again haha

Ram Powa!!!

And now I'm doing all the little piddly detail crap like putting in the manual pedal box and getting the old auto shifter out of the car and cleaning the engine bay up while the engine is out and then I gotta order some new trans mount bushings. new water pump due to the old one was broken off at the impeller when it was in the head on collision. Then get a new timing belt and tensioner the old belt was so bad on the seta that the belt ripped in half with a simple yank! but the car did run like a dream before we pulled it. other odds and ends to get as well. does anyone have any suggestions on what i should upgrade at this stage if im missing anything???

[jc43089]

Yea the eta is solid, runs very well.  Lucky that seta didn't break the belt while running, there was a tear halfway across the belt and it just ripped apart when I pulled at it.  Pretty good progress so far, get the parts you need and with another day it should be ready to turn the key!

[bfinley]

I may be interested in the eta motor if snap doesn't bite on it

[jc43089]

bfinley said:

I may be interested in the eta motor if snap doesn't bite on it

hmm yes, i stroker for you too!

[RamRod E28]

I thought u already had an m20 mr Finley?

[bfinley]

M20b20 with all the parts to run carbed.

3.0 liter turbo stroker might be easier when you start at 2.8 with a fully dressed motor.

I'll be running carbed by fall but next winter is motor building time

[RamRod E28]

Well snap hasn't bit on this one yet and I've got all the stuff to go fi

[RamRod E28]

Just buy mine and run hassle free fuel injection!

[bfinley]

I do actually want to run carbed for a time. Because carbs are awesome!

Let's talk price ?

[KaiserRolls]

bfinley said:

Because carbs are awesome!

[B C]

This is some bullcrap.

Sent from my

[RamRod E28]

Snap said:

This is some bullcrap. Sent from my

why so sad snap??? don't be sad get glad

[B C]

One only needs to consult with the experts on Yahoo Answers to gain a clear understanding of which is better, carbs or EFI

https://answers.yahoo.com/question/index?qid=20080506063936AA8P8CX

Dave87gn: "fuel injection is way better,"

Pedro S: "carbs r cheap and crude...Fi is better for mileage, engine life but complex and expensive...."

FrdFnatic: "if you flip ur car fuel injection will keep it running. carbs wont. so if u plan on flipping ur car i would go with carb"

[RamRod E28]

OK.. so a little status update on the seta swap e28 it may not look like much but just been doing all the piddly odds and ends on the car. I also did spend some time with a can of brakleen in the bay cleaning up any grease or dirt from not seeing the day of light in over 30 years. So without further ado some more pictures.

All this work to add one more pedal!!!

Got the steering column back in. which for some reason was a bigger bitch to do that I remember lol

Got the auto shifter out and that was easier said than done you have to almost completely remove the center stack to get its fat ass out of there.

Now just need to order parts and BAM!!! engine and trans are going back in and I will be posting burnout vids as soon as any of the bugs are sorted out.

[YoungCR]

Peddle boxes are fun! I know your pain haha.

[RamRod E28]

alrighty so no big update just realized that there are no pics of the e46 so i snapped a few just for the hell of it.

and some forum swaggerness

just washed it yesterday and went to a bonfire last night and the thing got covered in ash gotta love a black car

[RamRod E28]

Yes!!!!

[RamRod E28]

Finally my van is photoworthy thank you so much for telling me about these wheels Mr. Menard!!!!

[jc43089]

Looks great, how is the ride compared to before?  Might be a little more stable in the wind with the wider stance.