Official-look-what-i-found-thread (craigslist, other-forums, etc)

[HipMF]

GunMetalGrey said:

Feel free to keep an eye out for vehicles that you want in WA, I purchased a vehicle in WI and would be willing to do some low cost shipping of a vehicle from WA to WI.
Gas is cheap, work is in short supply, perfect time to drag a trailer around for a few days! 

I'd like to help, but I'm pouring all of my money into vintage camera lenses right now. j/k...maybe. Or saving for a vacation; can't remember which.

[ChrisO]

HipMF said:

I'd like to help, but I'm pouring all of my money into vintage camera lenses right now. j/k...maybe. Or saving for a vacation; can't remember which.

Oooooooo what lenses are we talking about? I've been a long time collector

[HipMF]

ChrisO said:

Oooooooo what lenses are we talking about? I've been a long time collector

Ha, so far I've managed to hold myself back for the most part. I wanted to get a pocket camera, so I picked up a cheap OM-D that's a little of the rough side, just to play around with. I'll be getting the pancake zoom for it, but I also wanted to try some old manual lenses just for fun. The first one I found was a Sigma mini-wide 28mm f2.8 for $9. The ad didn't say what mount it was, but I was going to adapt it to MFT anyway, so it didn't really matter. Turned out to be a Konica, so I've been looking at other Konica lenses. They seem to have a pretty good reputation. I'll probably pick up the 40mm f1.8 and maybe a couple others.

I just wanedt to experiment around with different length primes to seem what I like. Vintage glass is cheap and plentiful and I really like the solid build and feel. I could see it turning into a collection pretty easily. Another nice thing is that if I decide MFT isn't for me, I can switch to any other mirrorless system and take the lenses with me instead of starting all over again.

[HipMF]

ChrisO said:

Oooooooo what lenses are we talking about? I've been a long time collector

Now with pics:

[ChrisO]

Saw this 95 M3 being parted out on marketplace, check out that rust hole in the pan 

[Rekpoint]

ChrisO said:

Saw this 95 M3 being parted out on marketplace, check out that rust hole in the pan 

You should know this by now Chris. Its not just a 95 m3. Its an LTW. 

[SteelBlue]

Rekpoint said:

You should know this by now Chris. Its not just a 95 m3. Its an LTW. 

It was also Paul Walkers, $300,000 plz

[straight6pwr]

ChrisO said:

Saw this 95 M3 being parted out on marketplace, check out that rust hole in the pan 

perfect seat, no floor. did they use grandmas couch slipcover?

[SteelBlue]

https://appleton.craigslist.org/cto/d/neenah-04-bmw-m3-dinan-3-supercharged/7118373986.html

https://madison.craigslist.org/cto/d/windsor-bmw-e36-convertible-5-speed/7112106526.html

https://chicago.craigslist.org/wcl/cto/d/waterloo-97-bmw-328i-convertible-one/7118429806.html

I really want an E36 vert as a cruiser. Which I already have as the E30, but I also want one these.

[patsbimmer1]

Jdesign said:

HUGE project. Seller knows how bad the car is, but hides it in the listing. I drove over 2 hours to see this car. Its really bad, and if you go back a few pages in this thread, I have pictures of the inside and under it, and it closer resembles the car below than a BMW 2002.

I was reading this thinking "Why the fuck is he driving to go look at this swiss cheese jetta!?!?"  I wasn't surprised but I was confused.  I'm glad/disappointed the car pictured isn't what you were going to buy.

[HipMF]

That Jetta amuses me. I wonder what it weighs, who would take the time to do that, but also question whether it would tear itself apart during normal driving. The coefficient of drag is probably over 9000.

[jc43089]

HipMF said:

That Jetta amuses me. I wonder what it weighs, who would take the time to do that, but also question whether it would tear itself apart during normal driving. The coefficient of drag is probably over 9000.

Not sure how you would drive it, it doesn't even appear to have a seat.  How many hole saws does it take to make a swiss cheese Jetta?  Does it even have an engine?  I'm not sure.  At least his wheels keep with the theme.

[Jdesign]

SteelBlue said:

https://appleton.craigslist.org/cto/d/neenah-04-bmw-m3-dinan-3-supercharged/7118373986.html

https://madison.craigslist.org/cto/d/windsor-bmw-e36-convertible-5-speed/7112106526.html

https://chicago.craigslist.org/wcl/cto/d/waterloo-97-bmw-328i-convertible-one/7118429806.html

I really want an E36 vert as a cruiser. Which I already have as the E30, but I also want one these.

Thats a lot of coin for an E36 vert. If you really want a nice well sorted one I know of one for sale for less..

[Rekpoint]

https://bringatrailer.com/listing/s54-powered-bmw-330i-zhp-6-speed/?utm_content=128668282&utm_medium=social&utm_source=facebook&hss_channel=fbp-179943528721059

[SteelBlue]

https://throttlestop.com/detail/1988-bmw-m3-e30-coupe

Not CL, but local.

[patsbimmer1]

https://milwaukee.craigslist.org/cto/d/milwaukee-1995-bmw-m3-coupe-5-speed/7118852212.html

A top 3 color on the e36. This thing looks to be in good shape to.

[Rekpoint]

patsbimmer1 said:

https://milwaukee.craigslist.org/cto/d/milwaukee-1995-bmw-m3-coupe-5-speed/7118852212.html

A top 3 color on the e36. This thing looks to be in good shape to.

That car has been making the rounds online. Everyone thinks its a scam 

[YoungCR]

Rekpoint said:

That car has been making the rounds online. Everyone thinks its a scam 

Sold on BaT last year for 20K https://bringatrailer.com/listing/1995-bmw-m3-115/

also listed on Racing Junk in Milwaukee for $10k as well. https://www.racingjunk.com/BMW/184050345/1995-BMW-M3.html?category_id=&search=1995+M3&quickSearch=1&np_offset=0&from=search

Seems scammy

[patsbimmer1]

Rekpoint said:

That car has been making the rounds online. Everyone thinks its a scam 

I feel like such a fool!  At least I still have that money from that Congo prince I was assured I'd receive after sending them best buy gift cards.  Idiots.

[B C]

https://chicago.craigslist.org/chc/cto/d/des-plaines-1995-bmw-525i-s52-swap-5spd/7121756250.html