Official-look-what-i-found-thread (craigslist, other-forums, etc)

[Jdesign]

That wagon is super cool. I have seen it around before, and I know I have seen that impala in the background at local shows. E46 wagons are hard to find for the price of a sedan, especially ones that are not destroyed or rusty. Only downfall here is that its an auto.

I just spent 20 minutes trying to find a cheap E31. Its not easy.

[m42b32]

ChrisO said:

https://milwaukee.craigslist.org/cto/d/must-see-e46-bmw-wagon/6727492539.html

"Sahara Beige" e46 wagon. Pretty cool, but at $7800 with 180k miles it kinda seems overpriced

I'm pretty sure that's @wasnt m3's old car, still looks great

[wasnt m3]

m42b32 said:

I'm pretty sure that's @wasnt m3's old car, still looks great

Yes, it is. Was a great car but it's still an auto 323i. Still can't believe that I drove that car for nearly 8 years. $5k car IMO.

[SteelBlue]

I'm trying to imagine what goes through someones mind when they are trying to sell a car and this is what they come up with.

https://rockford.craigslist.org/cto/d/is-e30-bmw/6741524550.html

[Jdesign]

Really awesome car, too bad its flat red. Im sure the guy wants trillions of dollars too since there isn't a price. HUGE pet peeve of mine. Your not serious if you don't have a price IMO.

https://chicago.craigslist.org/chc/cto/d/rare-bmw-540it-wagon-6-speed/6743621306.html

Dont mind the salvage title, thats just from minor bumper damage

https://chicago.craigslist.org/wcl/cto/d/2003-bmw-325xi-wagon-awd/6741566414.html   

What I see:

E24 with an Ouchie on the trunk. Still could part it out and make duoble that price

https://chicago.craigslist.org/wcl/cto/d/1985-bmw-635csi-rare/6720787618.html

I guess the outcome of the paint almost made this guy speechless. 

https://chicago.craigslist.org/chc/cto/d/1999-bmw-3-series-m3/6736865006.html

A VERY nice E34 for way too much money

https://chicago.craigslist.org/chc/cto/d/1995-bmw-530i-mint-condition/6728281648.html

ChrisO said:

Also I'm on Autotrader looking at some 8 series, it looks like the value of them has quietly skyrocketed?? I can't find one less then $12k

I remember around the time I got my first M3 (almost 6 years ago) I'd see them on craigslist for as low as $2500. I remember a 850ci in Denmark, WI for $4k, and I think it had a 6 speed.

I think you were looking for a cheap 8 Series? Heres one with 200k and in need of paint/engine work/ among other things

https://chicago.craigslist.org/wcl/cto/d/bmw-850ci-1991/6742529439.html

335i for about $5k

https://chicago.craigslist.org/nwc/cto/d/2008-bmw-335i/6721686498.html

Another really nice E34 in Alpine but sadly auto

https://chicago.craigslist.org/nwc/cto/d/bmw-540i-1995/6727208537.html

$15k for a basic E24 because the guy is making payments on it? Seems like a scam doesnt it?

https://chicago.craigslist.org/nch/cto/d/classic-bmw-for-sale-by-owner/6720177446.html

SteelBlue said:

I'm trying to imagine what goes through someones mind when they are trying to sell a car and this is what they come up with.

https://rockford.craigslist.org/cto/d/is-e30-bmw/6741524550.html

Probably not much going on upstairs to begin with...

[P_Roloff]

Love that orient blue on the e34, too bad it's auto. And I agree, too much for it.

[ChrisO]

Jdesign said:

I think you were looking for a cheap 8 Series? Heres one with 200k and in need of paint/engine work/ among other things

https://chicago.craigslist.org/wcl/cto/d/bmw-850ci-1991/6742529439.html

I spy 4 piston BMW calipers. 

I've seen quite a few 850ci's without 4 piston calipers, did they only come on euro cars? Or later model 850ci's?

They seem really rare

[Jdesign]

ChrisO said:

I spy 4 piston BMW calipers. 

I've seen quite a few 850ci's without 4 piston calipers, did they only come on euro cars? Or later model 850ci's?

They seem really rare

They change halfway through US production (8/93 and on) where as the Euro cars got a completely different setup with larger diameter rotors. The switch halfway through production did a few things such as lower thermo rise, allow an increase pad size, increase surface force for the larger pad, and prevent flex in that larger pad. It makes sense when you think about it. 

Here is some info I found from a guy that found the info from another guy that might have got it from a guy at BMW? 

_Single piston front caliper:
Brake bias - 68% front & 32% rear.
Rotor thermal rise - 51% front & 49% rear.

Brembo 4-piston caliper:
Brake bias - 66% front & 34% rear.
Rotor thermal rise – 49% front & 51% rear.

Euro, CSi brakes w/4-pistion ATE caliper:
Brake bias - 66% front & 34% rear.
Rotor thermal rise - 50% front & 50% rear.
The larger (345x32mm front and 328x20mm rear) Euro CSi rotors reduce the calculated thermal rise by 15% over the smaller 324x30mm front and 324x12mm rear 840/850 rotors._

[suspenceful]

Jdesign said:

Really awesome car, too bad its flat red. Im sure the guy wants trillions of dollars too since there isn't a price. HUGE pet peeve of mine. Your not serious if you don't have a price IMO.

https://chicago.craigslist.org/chc/cto/d/rare-bmw-540it-wagon-6-speed/6743621306.html

335i for about $5k

https://chicago.craigslist.org/nwc/cto/d/2008-bmw-335i/6721686498.html

Another really nice E34 in Alpine but sadly auto

https://chicago.craigslist.org/nwc/cto/d/bmw-540i-1995/6727208537.html

1. That 540i wagon is perfect, minus the flat clear coat. Still a beautiful car though, that I'd love to own. I wonder what his price is.

2. That 335i has been listed for a long time (longer than the 29 days on CL). I remember that exact ad from spring time. Wonder what the story is there.

3. Don't see too many clean 540i E34 anymore. Looks great.

[Jdesign]

suspenceful said:

1. That 540i wagon is perfect, minus the flat clear coat. Still a beautiful car though, that I'd love to own. I wonder what his price is.

2. That 335i has been listed for a long time (longer than the 29 days on CL). I remember that exact ad from spring time. Wonder what the story is there.

3. Don't see too many clean 540i E34 anymore. Looks great.

YES to all of your comments.

[GunMetalGrey]

Jdesign said:

That 540i wagon is perfect, minus the flat clear coat.

Is it just me or does the hood fit all kinds of odd near the headlights? 
Can't tell if it's just the lighting.

[GunMetalGrey]

https://appleton.craigslist.org/cto/d/bmw-enot-going-lower/6713996989.html

Not going lower guys, but need to sell ASAP

[HipMF]

GunMetalGrey said:

https://appleton.craigslist.org/cto/d/bmw-enot-going-lower/6713996989.html

Not going lower guys, but need to sell ASAP

repost.

I kind of want it though to practice tuning on. Sure not paying $2k for that rust bucket though...

[GunMetalGrey]

HipMF said:

repost.

Ahh you're right. 
I thought he had some other amusing phrase in there last time.
I'm tempted to offer him 1k lol

[straight6pwr]

Where the hell is Neenah!? NeeeeeeHAW

[HipMF]

straight6pwr said:

Where the hell is Neenah!? NeeeeeeHAW

Woooow. Surprised I'm not the only one who remembers that.

Also, friggin lasers. Too bad it can't cut metal. Just zipping out some cardboard to verify dimensions.

[Jdesign]

Perfect winter car!

https://madison.craigslist.org/cto/d/1991-bmw-325ix-e30-awd-manual/6745561829.html

Good deal on a clean E46 Vert with a hardtop $2500

https://chicago.craigslist.org/sox/cto/d/2001-bmw-330ci-convertible/6747150163.html

Another 8 series but this one is clean and alot more doll hairs

https://chicago.craigslist.org/chc/cto/d/1992-bmw-850i-ci-csi/6746558141.html

A really clean E24 that doesnt run but its CHEAP 

https://chicago.craigslist.org/nwc/cto/d/85-bmw-635-csi/6746592166.html

[Rekpoint]

HipMF said:

Woooow. Surprised I'm not the only one who remembers that.

Also, friggin lasers. Too bad it can't cut metal. Just zipping out some cardboard to verify dimensions.

Through an Internship program I get to mess with 2 laser engravers like that. From 12.45 to whenever every day and get paid for making stuff. Too bad they are so expensive.

[HipMF]

Rekpoint said:

Through an Internship program I get to mess with 2 laser engravers like that. From 12.45 to whenever every day and get paid for making stuff. Too bad they are so expensive. 

I had a similar gig when I was going to tech school. They're super handy to have, but yeah, pretty spendy. Thankfully we have one at work that I can use.

[Bassboy3313]

Rekpoint said:

Through an Internship program I get to mess with 2 laser engravers like that. From 12.45 to whenever every day and get paid for making stuff. Too bad they are so expensive. 

I can cut out card stock templates with my vinyl cutter as well. Definitely comes in handy. I have even cut out gaskets from gasket paper with mine.