Official-look-what-i-found-thread (craigslist, other-forums, etc)

[Daggerty]

Boris3 said:

I've seen the car in paddock and on track. This is a good deal for a GTS2 prepped car with all the parts included.

General advice is buy your first and build your second. It gets you racing quicker and by that time you have a better sense if you're going to be all in and in what series.

Doesn't always work that way and some folks build their first and some get stuck mid project. Life intrudes and projects get sold.

Building to SCCA or NASA class versus building for chump, lemons etc also have different demands and price points. For those looking to buy a built car for NASA a well prepped clean SE30 runs in the $10-14k range. A car with GTS2 level prep like this swapped one or built on an e36m3 chassis moves you up the price brackets. Mid-$20k and higher...

So yes pretty wild what folks might shell out for a built race car. Hits you all at once in this case versus the frog in slowly boiling water build your own experience. Either way you're still smiling as you get "cooked"...

What is this racing thing you speak of? I understand the working on the car and never finishing thing quite well.

[B C]

https://rockford.craigslist.org/cto/d/bmw-530i/6314642277.html

[Earl]

"Adult driven, never raced"

[Jdesign]

That's a really odd car to set up for such duties. I think its going to be really hard to find a buyer.

[patsbimmer1]

I'm not even mad, i'm actually impressed that it was used to drift.  I really want to see a video.  The photo's are crap for the ad but he wrote it very honestly.

[P_Roloff]

My eyes...

https://chicago.craigslist.org/nwc/cto/d/1984-bmw-318i-e30-5-speed/6307759677.html

[P_Roloff]

Nice inexpensive set of wheels for an e30 if anyone's looking. 

https://chicago.craigslist.org/nch/wto/d/borbet-15-7x15-4x100-wheels/6310315449.html

[Jdesign]

P_Roloff said:

My eyes...

https://chicago.craigslist.org/nwc/cto/d/1984-bmw-318i-e30-5-speed/6307759677.html

I saw that on facebook. Looks like he did a great job masking..... Look at the mirror glass.

[m42b32]

NP/CP on Jalopnik today:

https://portland.craigslist.org/wsc/cto/d/2000-bmw-323i-wagon-full-swap/6310344711.html

I love that they left the exterior pretty much stock looking, awesome sleeper

[Boris3]

P_Roloff said:

Nice inexpensive set of wheels for an e30 if anyone's looking. 

https://chicago.craigslist.org/nch/wto/d/borbet-15-7x15-4x100-wheels/6310315449.html

These look like Borbet Type H, strong wheel but heavy. Maybe 21 lbs in a 15x7?? Good for snow tires / winter hooning / potential curb smacking, etc

If the seller is correct on the offset of +35 then you'll probably need spacers to fit on a regular e30 to get it closer to +25 for a 15x7 fitment. Should work on an ix though without spacers.

[B C]

m42b32 said:

NP/CP on Jalopnik today:

https://portland.craigslist.org/wsc/cto/d/2000-bmw-323i-wagon-full-swap/6310344711.html

I love that they left the exterior pretty much stock looking, awesome sleeper

Sleepers are awesome!

They have done well with that car

[straight6pwr]

m42b32 said:

NP/CP on Jalopnik today:

https://portland.craigslist.org/wsc/cto/d/2000-bmw-323i-wagon-full-swap/6310344711.html

I love that they left the exterior pretty much stock looking, awesome sleeper

holy twatwaddle!. i'd probably rather have that than my e30... whats wrong with my brain.

[The Full Banana]

m42b32 said:

NP/CP on Jalopnik today:

https://portland.craigslist.org/wsc/cto/d/2000-bmw-323i-wagon-full-swap/6310344711.html

I love that they left the exterior pretty much stock looking, awesome sleeper

I know the guy that put that car together. He used to be active on the RWD Volvo forum and I met him when I went out to Portland a couple years back. Super down to earth, really talented and has built a number of very nice trucks and RWD volvos in his garage.

[AsparagusMike]

s52 Motor and tranny, not too bad.....

https://madison.craigslist.org/pts/d/s52-and-zf320/6320808693.html

[straight6pwr]

AsparagusMike said:

s52 Motor and tranny, not too bad.....

https://madison.craigslist.org/pts/d/s52-and-zf320/6320808693.html

probably bad. blown head gasket from being boosted = motor could be wrecked

[B C]

straight6pwr said:

AsparagusMike said:

s52 Motor and tranny, not too bad.....

https://madison.craigslist.org/pts/d/s52-and-zf320/6320808693.html

probably bad. blown head gasket from being boosted = motor could be wrecked

Cracked head isnt out of the question either

[GunMetalGrey]

Snap said:

Stripped threads in the head isnt out of the question either

Fixed that for ya.

I would buy it, but have no use for it currently.
I believe he posted in on FB for 1700

[B C]

I know [emoji58]

Not the ideal scenario, but the compression test was all 190's, I got to hear it run, it was $500 and I repaired it properly.

I would have raged hard if one of the $2000+ S52s I was shopping had given me this sort of grief

[AsparagusMike]

straight6pwr said:

probably bad. blown head gasket from being boosted = motor could be wrecked

How do you know it was boosted?

[B C]

AsparagusMike said:

straight6pwr said:

probably bad. blown head gasket from being boosted = motor could be wrecked

How do you know it was boosted?

He has wept with a number of us who have wrecked our boosted engines.

There is also a stage 3 clutch listed in the ad too which is possible evidence. But mostly its just his spidey-sense tingling.