Official-look-what-i-found-thread (craigslist, other-forums, etc)
-
front drivers corner has been in an accident.
Aww come on, that paint is pretty close match on the front quarter lol.
-
Or the fender was rotten. Who is to say=P
Me?
-
Core support is f*ed, look at the engine bay pictures at the headlight bucket area
-
Front bumper is pushed in and crooked, and also huge gap between the bumper and the fender.
-
Missing front valance. There is really no reason to remove one unless its damaged beyond repair.
4)Hood and fender are replacements in a different color.
5)Missing the rear bumper - he quite possibly got rear-ended in the same accident.
Dan
-
-
Maybe he just jumped it in the field a few times=D
I'd buy that.
Dan
-
-
-
That seems like a killer deal. Am I missing something?
I don't think so, I think it's just a killer deal
-
That seems like a killer deal. Am I missing something?
Well there is things you can see that was used taken the budget route.
the harbor freight battery disconnect and the eBay 30 dollar "carbon fiber" filter and air duct
would I do the same thing? Yes because I realize certain things don't have better traits just because they cost 5 times as much.
That being said you can see money spent on stuff that matters, oddessey battery $$$$$$
Also the title issue might have some reason for it.
-
eBay 30 dollar "carbon fiber" filter and air duct
That's a Kamotors intake, they are actually a pretty good intake from what I have heard. IIRC they run about $150
-
That's a Kamotors intake, they are actually a pretty good intake from what I have heard. IIRC they run about $150
Dom hit the nail on the head. Kameron re-sells the 30 dollar "carbon fiber" filter and air duct kits that you can buy in bulk from Alibaba.
After failing to devise my own E30 intake, cramped up in the factory location with the factory AFM, ABS unit, and coolant reservoir, I bought the Kamotors intake.
The best thing about it is that it fits the E30 engine bay,
I don't trust it for filtration and the radii on the inside are dreadful for flow losses, but its pretty much all that exists besides the stock airbox.
When coupled with your run of the mill AFM adapter, you are faced with an even worse transition which creates a lot of turbulence and flow losses that hurt your low end performance.
-
Dom hit the nail on the head. Kameron re-sells the 30 dollar "carbon fiber" filter and air duct kits that you can buy in bulk from Alibaba.
After failing to devise my own E30 intake, cramped up in the factory location with the factory AFM, ABS unit, and coolant reservoir, I bought the Kamotors intake.
The best thing about it is that it fits the E30 engine bay,
I don't trust it for filtration and the radii on the inside are dreadful for flow losses, but its pretty much all that exists besides the stock airbox.
When coupled with your run of the mill AFM adapter, you are faced with an even worse transition which creates a lot of turbulence and flow losses that hurt your low end performance.
I stand corrected, thanks for the info!
-
Dom hit the nail on the head. Kameron re-sells the 30 dollar "carbon fiber" filter and air duct kits that you can buy in bulk from Alibaba.
After failing to devise my own E30 intake, cramped up in the factory location with the factory AFM, ABS unit, and coolant reservoir, I bought the Kamotors intake.
The best thing about it is that it fits the E30 engine bay,
I don't trust it for filtration and the radii on the inside are dreadful for flow losses, but its pretty much all that exists besides the stock airbox.
When coupled with your run of the mill AFM adapter, you are faced with an even worse transition which creates a lot of turbulence and flow losses that hurt your low end performance.
If you are looking for a little better filter, spectre makes a couple inline filters ranging from 3-4 inch inlet/outlet smooth look or flat edge. Part numbers are 9831-9833. No shame plug I make custom intakes and buy silicone couplers in bulk off of alibaba, I have up to 3 inch tube bender and bead roller.
-
-
That's a Kamotors intake, they are actually a pretty good intake from what I have heard. IIRC they run about $150
You mean a chinese intake from Alibaba that kamotors buys in bulk, puts his name on it and resells for A LOT more?
aka I bought one off ebay (when I first bought my car) for more than half the cost that kamotors sells his for and compared them to someone who had his. Same shit.
But don't tell Brian since kamotors is his boyfriend.
-
I have a brand new KA Motors branded intake I'll sell for $35 ($5 extra since it has the sticker on it).
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login