Official-look-what-i-found-thread (craigslist, other-forums, etc)
-
Between parting the car out and scrapping it you may get $5k out of it. It would be a good swap car if the engine hasn't been fucked. Even mistreated the N5x has proven to be pretty sturdy internally
-
i think you're all crazy.
A complete n54 engine, including turbos with 100k miles is worth $2000, MAYBE $2500 tops coming out of a crashed car like this with no warranty. There is nothing special about the motors - they are a dime a dozen and were put into multiple BMW models and on the used market they just are not worth a ton of money. The interior trim will sell, the seats will sell, nobody will want the differential and people don't typically blow up gears on the stock manual transmission so not a lot of people are looking to replace those either. In my completely irrefutable opinion it's a lot of work just to recoupe the $5k investment. You've invested 20 hours into taking stuff apart including pulling the motor so you have to make up that time plus the initial investment just to break even, and then you need to worry about having enough to sell that people want to turn a profit.
And while I admire Earl's positive outlook on things in general, there isn't much reason to build up an n54 block. Even if the motor were trashed and you needed to rebuild it, there isn't much sense in using aftermarket internals and paying the premium for those when 99.9% of N54 builds are not going to make enough power to require anything other than stock n54 internals.
The only legitimate reason to purchase this car is if you want to swap the n54 into something and thus need to ensure you have all necessary components like wiring harnesses. I forbid anyone on this forum, as their friend, from purchasing this vehicle for any reason other than to swap the engine.
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MR
2003 E39 M5
2002 E46 M3
2021 X5 40i -
You just said what I said in many more words.
-
You buy a 135i to have a well buttoned-together performance car.
It has already been raped beyond being well buttoned-together anymore and would be a spendy platform for a track rat compared to a cheaper more disposable/replaceable chassis.
The world needs more N54 swapped 80's and 90's cars
-
You buy a 135i to have a well buttoned-together performance car.
It has already been raped beyond being well buttoned-together anymore and would be a spendy platform for a track rat compared to a cheaper more disposable/replaceable chassis.
The world needs more N54 swapped 80's and 90's cars
I hear you volunteering...
-
I need a n54 in my e21.
-
really wish I could convert an n54 to port injection and run a normal standalone. They are very interesting engines.
Breh... everyone is doing it these days.
http://www.fuel-it.biz/e-series-port-injection-options/
-
Breh... everyone is doing it these days.
http://www.fuel-it.biz/e-series-port-injection-options/
Yes I see that, but I'm saying Completely get rid of the direct injection. That shit is just parallel to stock ecu. Only standalone ecu's that can handle the n54 direct injection are syvecs and I'm not a millionaire haha
sk8 or die
-
You buy a 135i to have a well buttoned-together performance car.
It has already been raped beyond being well buttoned-together anymore and would be a spendy platform for a track rat compared to a cheaper more disposable/replaceable chassis.
The world needs more N54 swapped 80's and 90's cars
I guess we all have different goals. If I were to buy a 135I, it would get a large single turbo, LSD, nice coilovers and sticky tires, and be an epic daily driver.
sk8 or die
-
Yes I see that, but I'm saying Completely get rid of the direct injection. That shit is just parallel to stock ecu. Only standalone ecu's that can handle the n54 direct injection are syvecs and I'm not a millionaire haha
I know, just buy a port injection kit and disconnect the direction injection
I guess we all have different goals. If I were to buy a 135I, it would get a large single turbo, LSD, nice coilovers and sticky tires, and be an epic daily driver.
Why convert to port injection when you've already got it all figured out? But seriously, for straight line power this is all you need. The problem is, single turbo setups weren't readily available or dialed in (tunes, fuel, etc) until recently. You need to add a fuel system (port injection, upgraded LPFP) to your list, but that is pretty much my plan once my stock twins give up. Most people are fine on stock motor until 800whp+. Anything above that seems to develop a problem with headgasket, piston rings, etc.
-
I know, just buy a port injection kit and disconnect the direction injection
Why convert to port injection when you've already got it all figured out? But seriously, for straight line power this is all you need. The problem is, single turbo setups weren't readily available or dialed in (tunes, fuel, etc) until recently. You need to add a fuel system (port injection, upgraded LPFP) to your list, but that is pretty much my plan once my stock twins give up. Most people are fine on stock motor until 800whp+. Anything above that seems to develop a problem with headgasket, piston rings, etc.
Would only convert to standalone and port injection if swapping into an e30 for example, otherwise, the wiring is HEAVY on the complicated side haha. Thats why I was talking about it. Chances are slim that I would want a 135i, well maybe when I get old, or they get cheaper.
sk8 or die
-
reposting from facespace:
-
Anyone have like $50k I could borrow/have? Located on Franklin, WI. Guy has quite the collection.
-
Anyone have like $50k I could borrow/have? Located on Franklin, WI. Guy has quite the collection.
That things been up for sale for awhile at the same price. Somebody will have to really love the 1M to buy this instead of forking over a few grand more for an M2. I don't think these are investment grade yet but they definitely haven't lost any value. Buy it, drive it for a year, sell it for the same price.
-
http://chicago.craigslist.org/chc/pts/5609987439.html
Pretty cheap for a set of LTW's
Also found these: http://milwaukee.craigslist.org/wto/5608625468.html
Super cheap style 19's to refinish
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login