My E92 335xi Build Thread - Lots of Pics
-
Installing Jamil's front KW-V1's
Front KW-V1's in. We ran into a few issues due to his being the X-drive model, and not RWD. The front axles didn't let you drop the front suspension far enough down to just pull everything out, it required alot of wrestling. (note, that off white color on his fender is masking tape) And Jamil in the Red hoodie.
Side shot of the KW-V1's in the front, starting the rears now!
After coming back from Harbor Freight for a 21mm deep socket, we realized my driveway looked like BMTrouble-U central. (E28 was mid process of new exhaust)
KW-V1's in the rear (Lowered the front more after this photo, and my driveway is all sorts of wavy)
Jamil caught the whole, lower it as much as possible. He originally told me he wanted to just "lower it a little bit, get rid of the X-drive's 4x4 status". We got the front coil overs on, and he wanted the front about 4 threads off the bottom, comes back to do the rears, and the rear's are at their lowest setting, he decided to lower the front coils even more!
Good to see you like the new look Jamil! Glad I could help!
-
I like all the good looking E92s that are popping up on the forum.
-
Jamil caught the whole, lower it as much as possible. He originally told me he wanted to just "lower it a little bit, get rid of the X-drive's 4x4 status". We got the front coil overs on, and he wanted the front about 4 threads off the bottom, comes back to do the rears, and the rear's are at their lowest setting, he decided to lower the front coils even more!
Good to see you like the new look Jamil! Glad I could help!
Hahaha, true story. Def didn't think I'd go down that far, but you called it right from the beginning. I actually raised the rear up by 1/4" or so, I wanted to lift a tad more, but the stupid top mount would spin with the adjusting ring so I clamped from the bottom and 1/4 was as high as I could go, but I think it looks aiight.
Thanks again for your help. You're the fuckin' man.
-
-
Hey Jamil dewd. You should lemme borrow that go-pro for a bit.
And the software for it if it requires it! Gunna need your mic as well!if you have a computer than can read SD cards, you're golden pony boy. (or you can just read what's on the card by plugging it on when turned on with the usb cable)
you can use whatever free video "editing" software came on your computer to just chop clips together as well.
If you want to get into adjusting color/audio and enhance your clips download GoPro Cineform Studio, it's free-ninety-free on their website
-
if you have a computer than can read SD cards, you're golden pony boy. (or you can just read what's on the card by plugging it on when turned on with the usb cable)
you can use whatever free video "editing" software came on your computer to just chop clips together as well.
If you want to get into adjusting color/audio and enhance your clips download GoPro Cineform Studio, it's free-ninety-free on their website
I don't have an SD card reader. this computer is ancient (like 2004) but if i can just USB 2.0 it in, I'm golden.
-
I don't have an SD card reader. this computer is ancient (like 2004) but if i can just USB 2.0 it in, I'm golden.
Yup just need the standard USB camera cable.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login