87 535is - getting started
-
So ... Not really bad news, it just delays us a bit. When I ordered the pistons, I ordered them for my engine but I never cross-referenced the numbers ... hind sight 20/20. The pistons call for a 92.5 bore and the factory block is 92.0 ... Pistons don't fit. The reason I say this is not really bad news is the fact that I did have some pitting in my cylinders. Not scoring, just pitting as the car sat for years at one point in it's life. Now we have to bore .5 mm over which will take care of all those flaws and give me a cleaner cylinder.
So .. block will go in Monday. We will have to see how long it will take to get done and I still need Mat at Urban Motorworx to complete the longblock as I want him to verify clearances and time it.
Good news is that we put in all new main and connecting rod bearing and it was spot on. Clearances there were all right in the middle of spec. With the crank torqued down, it spun with minimal effort.
Most of my pics are on my real camera and I will upload those later but you do get the assembled pistons in their resting place for the time being.....
-
Nothing wrong with more displacement
there's no replacement for displacement.
unless you turbo......
but we all know what that means..
Lookin' forward to seeing this thing all together!!!!
-
Fuck the Euro M20. Go with the big six. I'm still looking for a B35 head. =\
There is a 735i at the local junk to me.
The 735i engine bay looks similar to this
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login