chit chat thread
-
Eau Claire?
SR33, highway C (Mindoro cut) ?
Sounds about right. If you're looking for a legit switchback, there's one by Devil's Lake. I don't remember it being particularly photogenic, but there's plenty of rubber on the road from the fuckbois.
It's on street view as well.
-
Sounds about right. If you're looking for a legit switchback, there's one by Devil's Lake. I don't remember it being particularly photogenic, but there's plenty of rubber on the road from the fuckbois.
It's on street view as well.
We did that quite a few years ago, @straight6pwr has shots possibly of us. I'm all for a driving tour up there again.
-
Sounds about right. If you're looking for a legit switchback, there's one by Devil's Lake. I don't remember it being particularly photogenic, but there's plenty of rubber on the road from the fuckbois.
It's on street view as well.
I think we took this on the cruise one year.
@KaiserRolls Yea I was in that area but didn’t take the cut, I was just finding a bunch of roads off the beaten path. Cut through wildcat state park too.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Well I had a epic day yesterday. I discovered some roads in Wisconsin that I would never imagine existed. Im talking switchbacks, massive elevation changes, and hairpins. Black ribbons of glory. A few of the roads were not in ideal condition, but there were so many that had FRESH blacktop I was amazed. I drove through the drift-less area from Eu Claire, all the way to Sun Prairie just west of 94. It took me about 8 hours of driving as I was doubling back and taking roads that I couldn't hit. I marked a bunch of them that I felt were worthy of a future cruise. Im likely going to go back this weekend and verify I solid route as I will be staging a video for two of my friends cars in the area.
Mind sharing them as route in google maps or something??
-
Mind sharing them as route in google maps or something??
I marked all the roads that were epic, but they are not really in a cohesive route per say. I was back-tracking a bunch, just trying to hit anything that looked squiggly on the map. I also am guilty of enjoying myself so much i forgot to mark some.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Do you guys think the growing concerns regarding the supply chain will impact getting parts for cars? I have my list of things I want to do on the e30 this winter and I'm starting to wonder if I should get as much as I can now to just have it. I know not everyone wants wheel bearings for christmas, but if the other systems are strained, I assume it would have some spillover?
Things that I can think of is I'm looking at new speakers and an amp for the car. Crutchfield has them all in stock now, but they only have like three single-din head units in stock. Could speakers be next?
-
Do you guys think the growing concerns regarding the supply chain will impact getting parts for cars? I have my list of things I want to do on the e30 this winter and I'm starting to wonder if I should get as much as I can now to just have it. I know not everyone wants wheel bearings for christmas, but if the other systems are strained, I assume it would have some spillover?
Things that I can think of is I'm looking at new speakers and an amp for the car. Crutchfield has them all in stock now, but they only have like three single-din head units in stock. Could speakers be next?
You mean already impacting? I work directly with the automotive aftermarket suppliers in the suspension, accessories, electronics, lugs, performance parts, etc categories and everyone is already falling behind and it's not looking to get better for 2022. If it is made out of copper, aluminum, steel or relies on being shipped into the country then it will continue to struggle.
-
You mean already impacting? I work directly with the automotive aftermarket suppliers in the suspension, accessories, electronics, lugs, performance parts, etc categories and everyone is already falling behind and it's not looking to get better for 2022. If it is made out of copper, aluminum, steel or relies on being shipped into the country then it will continue to struggle.
I am aware that segments of parts are becoming more difficult to get. When I shopping for suspension or the casual browse I have been seeing more performance stuff being backordered with no ETA. I guess I was thinking more of like the cart of random maintenance parts that I put together on FCP. Should I be ordering that kind of stuff now knowing that there is stock of it right now even if it's a project that I'm not going to get to until March? Should I be ordering speakers from crutchfield right now before the demand spikes over Christmas?
-
I am aware that segments of parts are becoming more difficult to get. When I shopping for suspension or the casual browse I have been seeing more performance stuff being backordered with no ETA. I guess I was thinking more of like the cart of random maintenance parts that I put together on FCP. Should I be ordering that kind of stuff now knowing that there is stock of it right now even if it's a project that I'm not going to get to until March? Should I be ordering speakers from crutchfield right now before the demand spikes over Christmas?
Order when you can afford to get it. If it's made of any commodity it will eventually become a problem.
-
Order when you can afford to get it. If it's made of any commodity it will eventually become a problem.
A couple years ago, the electronics industry went through a capacitor shortage. The cause was allegedly that the manufacturers had planned on demand falling, but it never did. It takes years to spin up a new factory and no one wanted to do it if demand was going to level off or fall. Supply slowly started to dry up.
Of course, when word got out that there wasn't going to be enough supply, everyone panic-bought, which of course made the problem worse, causing more people to think "This is bad, maybe I should panic-buy...".
A year later everything was back to normal and no one was worried about the alleged capacitor shortage anymore...
-
A couple years ago, the electronics industry went through a capacitor shortage. The cause was allegedly that the manufacturers had planned on demand falling, but it never did. It takes years to spin up a new factory and no one wanted to do it if demand was going to level off or fall. Supply slowly started to dry up.
Of course, when word got out that there wasn't going to be enough supply, everyone panic-bought, which of course made the problem worse, causing more people to think "This is bad, maybe I should panic-buy...".
A year later everything was back to normal and no one was worried about the alleged capacitor shortage anymore...
Good story
-
A couple years ago, the electronics industry went through a capacitor shortage. The cause was allegedly that the manufacturers had planned on demand falling, but it never did. It takes years to spin up a new factory and no one wanted to do it if demand was going to level off or fall. Supply slowly started to dry up.
Of course, when word got out that there wasn't going to be enough supply, everyone panic-bought, which of course made the problem worse, causing more people to think "This is bad, maybe I should panic-buy...".
A year later everything was back to normal and no one was worried about the alleged capacitor shortage anymore...
I guess it’s technically panic buying, but I think of it more like trying to avoid having something dumb go on back order and and prolong projects. That’s happened a couple times already and it’s super annoying.
-
I've typically always bought most parts around the holiday sales because of pricing but at this point if it's something I'd need I would just buy too. This reminds me I need some E34 parts.
I was lucky to get a water pump for my 15L Cummins same day a month ago. Newer trucks can't get them right now along with EGR sensors, all 280+ days out on back order
-
I'm working as an electrical contractor now and supplies are a big issue. Simple stuff like breaker panels, meter pedestals, breakers, etc. And if you can get it the prices have gone up by 50% just this year on many things. Construction is really busy right now so it is probably due to both supply issues and increased demand.
-
I'm working as an electrical contractor now and supplies are a big issue. Simple stuff like breaker panels, meter pedestals, breakers, etc. And if you can get it the prices have gone up by 50% just this year on many things. Construction is really busy right now so it is probably due to both supply issues and increased demand.
I work as a lighting and controls engineer for a lighting rep agency selling to distributors and contractors and you are 100% correct. Our lighting manufacturers had at least 2-3 price increases this year alone. Lead times for fixtures and control devices have sky rocketed too. We are still super busy tho which is good.
-
I went outside.
Mmm, south bluff. Always wanted to try it, never knew where to start. Any tips?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login