chit chat thread
-
Yes sir!
-
Two bucket list cars in a day.
Do not grab the door piston on the Senna when trying to close the door from the inside. Almost broke my fingers off. In my defense it was dark and my first time closing the door and the bright green piston looked like a handle.
-
@patsbimmer1 “Mike, are you driving right now?”
“No, I’m in the passenger seat. Riding around in the rolls. Eric’s driving”
@patsbimmer1 “Bockhaus?”
*turns video call camera towards me*
”Sup Pat”
@patsbimmer1 “Eric, what the fuck? I expect a full write up on WIBIMMERS”
Two bucket list cars in a day.
Do not grab the door piston on the Senna when trying to close the door from the inside. Almost broke my fingers off. In my defense it was dark and my first time closing the door and the bright green piston looked like a handle.
Explain yourself plz
-
Ship them?
The gentleman doesn't want to (probably a PITA given the odd shape).
-
If anyone needs something 3d printed 4 cheeaaap feel free to shoot me a message.
E30 vent and OBC gauge pods
E30 switch delete plates
E36 A pillar clips
E36 radio delete / door panel repair kit (Top brackets)
318ti 5.25 woofer conversion brackets for the rear
Some of the stuff I've been experimenting with. Doesn't even have to be car related. I can print you a CAT FFS.
-
If anyone needs something 3d printed 4 cheeaaap feel free to shoot me a message.
E30 vent and OBC gauge pods
E30 switch delete plates
E36 A pillar clips
E36 radio delete / door panel repair kit (Top brackets)
318ti 5.25 woofer conversion brackets for the rear
Some of the stuff I've been experimenting with. Doesn't even have to be car related. I can print you a CAT FFS.
Friendly competition I see.
-
Build volume is always a key factor in who you pic. Also, material selection and if you are using a dual head for soluable or break-away support.
Lets get some detes men.
Mine is 200mm cube build surface. I use mostly PLA and PETG. In process of building an enclosure to experiment with ABS and ASA. Single head extruder with breakaway supports.
-
whoever starts repro'ing dumb plastic bmw clips that always break gets my business
Dan
-
whoever starts repro'ing dumb plastic bmw clips that always break gets my business
Already started
Mine is 200mm cube build surface. I use mostly PLA and PETG. In process of building an enclosure to experiment with ABS and ASA. Single head extruder with breakaway supports.
220x220x250mm Same lol
-
Anyone interested is stepping out for a bit come Feb/Mar?
It's easier to get good pricing if you have a group..
http://admo-tours.info/off-road/
This is one of the more difficult tours as far as I can tell... costs ~$1k/day all inclusive
-
-
Too difficult for me, I’ve been to Ki once and learned how to jump, but I would need more practice.
-
I emailed them, but they haven't gotten back to me. I'll give them a call after the holidays, but I'm leaning more towards just renting a dual sport/adventure touring bike and putt-putting around Arizona for a few days. Not as much fun, but ~1/4 the cost.
https://goo.gl/maps/BWzU8ykhkQEqiK2U8
Highway 60 East of Phoenix leads to some cool areas, I've done this drive twice now all the way to Albuquerque, NM.
-
https://goo.gl/maps/BWzU8ykhkQEqiK2U8
Highway 60 East of Phoenix leads to some cool areas, I've done this drive twice now all the way to Albuquerque, NM.
Definitely an option. Could take that out to 191.
Or this:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login