chit chat thread
-
http://www.r3vlimited.com/board/showthread.php?t=210783
All you need to know
Why have hacked up wiring to accomplish the same thing? If you use the 4cyl 80/88c switch (61 31 8 361787) it plugs right in. The only wiring needed is to wire your new fan to black/blue AND black/green on his wiring diagram (assuming single speed fan) and change fuse 3 (on the car in his diagram) to a 30A. The fuse size change is safe because the wiring is the same size on both circuits. If you have a failed low speed resistor on your stock aux fan you can just bypass the resistor and upsize fuse 3 resulting in high/high rather than low/high.
About the Chasebay overflow, I am confused how you will use that? It is not a pressurized expansion tank. Isn't it made for a system with a cap on the radiator?
-
IWhats special about the z3m rad?
Bigger than m42, and thicker than the e30 6 cylinder radiator.
Where does the chase bay overflow plug in to? Never really thought about that.
-
It plugs into the nipple of a filler neck.
When the system needs to relieve pressure, the spring compressed in the cap ,the seal goes up/becomes unseated, and allows the pressure to go to the nipple. This allows the pressure to vent into the overflow=) You probably already knew that though
-
This thread need to get back to motorcycles.
Because it's spring and they are way more fun
-
I didn't know that actually, not too familiar with that.
So, where does the other line on the overflow go to? Back into the system I assume?
-
One of my current projects. Full restoration of a 1960's Honda S90. Have everything for it, just taking my time to do it right.
-
What do y'all think of my retro inspired black spoiler?
I like it!
those Fuchs TJ has would work really well with that look too.
-
That must have been a ton of masking to just dip the wheels and spoiler. Did you use the factory tow hook in the front to do it?
Masking wasn't bad really, I didn't mask anything in wheels other than the calipers, I just peeled it off the tires. Tow hook? For what?
Solid "Meh" on the black from me.I don't like black wheels ever tho - so I'm biased.
The wheels are temporary, I'll be getting 18" mesh wheels in the future, but they're also black so you won't like them either
I like it! those Fuchs TJ has would work really well with that look too.
Thanks Bro-Chief, if those Fuchs were 18s I would have bought them instantly!
-
Masking wasn't bad really, I didn't mask anything in wheels other than the calipers, I just peeled it off the tires. Tow hook? For what?
The common practice for dipping car parts or cars is to dip them in a vat appropriately sized for the item. Since you did the wheels and the rear....thing....I assumed you had a car sized vat, masked off what you didn't want dipped and lifted the car into the vat with a crane hooked to the front tow point.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login