WIBIMMERS

Granted this is a longshot but I'm looking for a Speedline Type 2116 wheel (also known as Chrono or maybe Super Turismo). Specs stamped on the wheels are 17x8 and ET40. What makes these a bit more unique is that they BMW fitment 5x120 with an e36/46 centerbore (72.56). A few years ago, I picked up a used set of four. Three of the wheels were in good condition. One wheel though has two repaired cracks on the inside edge that look have been professionally done, but ideally I would like to find a clean one. Let me know if you have or happen to come across one or more of these. Thanks! Here is what the Type 2116 wheel looks like: [image: IMG\_1171.jpg]

131,050 [image: IMG\_4936.jpeg] Well, my time with this car has come to an end. What a wonderful car and one I’ll truly miss, but it was time. It sat nearly all summer and was just getting to be a pain to maintain on top of the truck, e30, and e91. It went to a local guy who was looking for a neat older car to learn to wrench on, so I think it’ll suit him well. It remains the quietest, most solidly built car I’ve ever owned, it was seriously a tank. Hung the tail out in the snow pretty impressively too. Replaced the blower motor before I sold it, and sent two sets of wheels and most of my e34 spares along as well. I’m excited to have the space back, one less project, and to be able to focus more on the E91 and E30. I still have the MOMO Heritage 6’s and the m-systems, if anyone was wondering haha. MOMO’s will be listed as soon as I wash them, and the M-Systems will hopefully get their restoration completed once the e30 is back on the road.    Farewell to the E34 club, it’s been a good ride!

Anyone have a 173 DME laying around? Looking to swap out my 153 to pick up better CEL functions and add a chip at the same time.

Collecting parts!  Still holding out hope.  Hahaha. Sadly, the M5 is not on the list before the Porsche. That is an eternal project probably never to be completed, hahaha.

Back to this again. Looking for an affordable e46 in good shape for a winter daily. Ideally a 330i/ix MT but willing to consider a 325i/ix, and maybe AT versions if good transmission service history.  Higher mileage close to either side of 200k is OK again if there is a good service history. Also, since the car will be residing in Waukesha County it has to be able to pass WI emissions so no gutted cats or headers. Thanks!

Images are below, I have more I can send but didn’t feel like clogging this up with them.  [image: IMG\_4610.jpeg] [image: IMG\_4612.jpeg] [image: IMG\_4613.jpeg] [image: IMG\_4614.jpeg] [image: IMG\_4615.jpeg] [image: IMG\_4616.jpeg] [image: IMG\_4617.jpeg] [image: IMG\_4618.jpeg] [image: IMG\_4619.jpeg] [image: IMG\_4620.jpeg] [image: IMG\_4621.jpeg] [image: IMG\_4622.jpeg] [image: IMG\_4623.jpeg] [image: IMG\_4624.jpeg] [image: IMG\_4626.jpeg] [image: IMG\_4628.jpeg] [image: IMG\_4631.jpeg] [image: IMG\_4632.jpeg] [image: IMG\_4633.jpeg] [image: IMG\_4634.jpeg] [image: IMG\_4636.jpeg] [image: IMG\_4649.jpeg] [image: IMG\_4650.jpeg] [image: IMG\_4651.jpeg] [image: IMG\_4654.jpeg] [image: IMG\_4665.jpeg] [image: IMG\_4581.jpeg] [image: IMG\_4582.jpeg] [image: IMG\_4721.jpeg] [image: IMG\_4719.jpeg] [image: IMG\_4722.jpeg] [image: IMG\_4723.jpeg] [image: IMG\_4724.jpeg] [image: IMG\_4725.jpeg] [image: IMG\_4726.jpeg] [image: IMG\_4727.jpeg] [image: IMG\_4728.jpeg] [image: IMG\_4730.jpeg] [image: IMG\_4731.jpeg] [image: IMG\_4734.jpeg] [image: IMG\_4740.jpeg] [image: IMG\_4741.jpeg] [image: IMG\_4743.jpeg] [image: IMG\_4744.jpeg] [image: IMG\_4745.jpeg] [image: IMG\_4748.jpeg] [image: IMG\_4750.jpeg] [image: IMG\_4755.jpeg] [image: IMG\_4756.jpeg] [image: IMG\_4757.jpeg] [image: IMG\_4759.jpeg] [image: IMG\_4762.jpeg] [image: IMG\_4764.jpeg] [image: IMG\_4763.jpeg]

Make offer before I scrap them Want them gone in the next 24 hours. ASA CSL Replicas 17’s (one bent) X5 Style 58 18’s decent  Oshkosh 920 479 0299 [image: IMG\_6384.jpeg] [image: IMG\_6385.jpeg]

Car is sold

Hey all - realized that I bought a early G260 with the larger output flange, and bought a brand new later model 325i driveshaft with the smaller giubo, and am long past the return window.   I’d like to try swapping on a late model smaller flange (some have had success, some haven’t) before dropping coin on another transmission, although if anyone has a good one of those I might be interested. If you have a 325i trans sitting around with a bad synchro or similar, this would be perfect - I’d be willing to buy the whole transmission.    For reference: the eta cars all came with the larger giubo, while the i cars got the smaller one.   Thanks!

KaiserRolls said: Done as in….? Project car for sale/parts time. I’ll post with details in a few days.

Price Duuuuuuuuurrrrrrrop! $300 each.

I'll take that as a no.

Boris3 said: This might be useful: Understanding E30 speaker and amp wiring - R3VLimited Forums This is really useful! Thank You!

Wow that's an awesome result, I bet it's a riot to drive!

​

MVP Track Time cordially invites you to our October 14-15, 2023 Road America track event.  I hope you’ll join us for the on-track fun in exquisite Elkhart Lake, Wisconsin. Our schedule offers you maximum driving time (2+ hours of scheduled daily track time for each run group) instead of standing around the paddock.     October 14-15, 2023:  Road America (Elkhart Lake, WI) – 15th annual Cheese Heads on Track Registration for Road America, $485 for the weekend, is available on line with Pay Pal at the link below: On-Line Registration:  http://www.mvptracktime.com/id92.html Please feel free to join us at Road America October 14th-15th. All courteous, considerate, safe drivers are invited and welcome. Please, don’t hesitate to contact me if you have questions. I hope to see you at Road America. Happy Motoring! Mark Pfeffer – MVP Track Time Phone: (314) 249-3770 E-mail: [email protected] [image: Road America.jpg]

I honestly would be interested in the hood, doors, fenders, shit, maybe the whole shell? I will PM you.

Trying to win it on lap 1!

P_Roloff said: I’m realizing now that you did this on my car   Best change ever lol, I did it to my wife's Mini too

What the title says - looking for a left hand side cover and finned piece for style 20 m-system turbines. I know it’s a long shot here, but maybe someone has a friend of a friend. I don’t explicitly need the center cap but will certainly buy one with the cover if available to have a spare.    Pic for attention: [image: 3DCE0601-A9ED-46F7-83F1-5BFE7959A347.jpeg]   Help me make my threesome into a foursome!