Four Post lift?
-
For guys considering a lift, one other comment is my garage only has a 9' ceiling. Maybe all 4 post lifts are like this but the detent slots in the bars the car hangs from are 6" apart and they have 6" of thread at the top you have full adjustability. In order to stack the e21 over the 911, I had to move the bars a couple inches. It's a tight fit. There's 4-5" to the ceiling and about the same from the apex of the roof of the 911 to the drip trays.
Later,
Wally
-
wow, props Wally - you've got that fitment as perfect as it gets. I can't believe how tight those cars sit together in relation to the lift and ceiling
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MR
2003 E39 M5
2002 E46 M3
2021 X5 40i -
It was a little nerve racking the first time I drove the 911 under there. It's close enough that I think if the two cars weren't lowered, it might not make it.
The other thing to think about is one has to raise the car on top an inch or so to take the load off the locks so they retract and will let the car down. There's a story out there about a guy with a Viper that raised the car up, the locks latched, then he didn't have enough clearance to raise it to unlock the latches and the car was trapped up there. Never heard how he got it down, if the old "let the air out of the tires" was enough.
-
Wow....awesome fitment, and definitely important factors to consider. I'm pretty lucky, my shed has open trusses and the point where they meet the wall is 12'.
I decided I couldn't afford a bendpak, so I got a triumph. Probably some rebranded chinese junk, but it had good reviews, came with the casters and drip trays, and had decent freight cost. Hopefully getting it by the end of the week. Then a giant shed reorganization will commence.
I will attempt a 1 person assembly like I did with my 2 post. Not sure of how successful that will be. haha
-
Wow....awesome fitment, and definitely important factors to consider. I'm pretty lucky, my shed has open trusses and the point where they meet the wall is 12'.
I decided I couldn't afford a bendpak, so I got a triumph. Probably some rebranded chinese junk, but it had good reviews, came with the casters and drip trays, and had decent freight cost. Hopefully getting it by the end of the week. Then a giant shed reorganization will commence.
I will attempt a 1 person assembly like I did with my 2 post. Not sure of how successful that will be. haha
If the one person trick doesn't work you always have my number=)
-
Sweet! Who did you order it through?
Some ebay seller. Contacted him for a shipping quote and completed the transaction. Pretty painless!
If the one person trick doesn't work you always have my number=)
Awesome! I appreciate the offer. Thank you!
-
Your aunt must really love that Cabrio to save it from succumbing to Winter
Yeah, not really sure what her deal is with it. Has a lot of rust, she's always been a volkswagen fan. I just hope I don;t have it much longer than this winter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login