Jake's Epic BMW 135i Build Thread! (5+ Years of Ownership)

[suspenceful]

Oh, and I filmed a overview video of my garage setup for those who are curious.

If you don't care about the garage, I took the 1-series for a spin with some WOT pulls, because who doesn't like that?

[SteelBlue]

"hits 100..kilometers per hour pretty quick"

[suspenceful]

Well, I installed my Doc Race intake manifold on Saturday!

I put together a very detailed write-up with a required parts list, DIY installation and dyno data. Check it out now:

http://my1series.com/2018/08/14/doc-race-intake-manifold-installation-dyno-results/

For a brief overview, here are some photos and a video.

Here's a graph I overlaid with the stock manifold vs Doc Race manifold. It favors the stock manifold for ambient temperature and spool RPM, but gives you an idea of the power it picks up in the midrange. This is good power under the curve. +49whp and +47wtq at 5500 RPMs. I will eventually go back to the dyno and do a 29psi pull in 70*F weather starting at 2000 RPMs with the Doc Race intake manifold for a more apples-to-apples comparison.

[Jdesign]

Nice!! That manifold looks good in there too!

[Rekpoint]

I know this question is not related. How similar are the e36 and e82 chassis? Asking for a friend.

[Jdesign]

Rekpoint said:

I know this question is not related. How similar are the e36 and e82 chassis? Asking for a friend.

They have the same lug pattern.

[suspenceful]

Rekpoint said:

I know this question is not related. How similar are the e36 and e82 chassis? Asking for a friend.

Having owned both, they're similar but very different. Size feels roughly the same when driving, but the E82 is taller. Other than that, just feels a lot newer. It's been a while since I've driven an E36 so I can't comment on handling characteristics.

One day I'd like to LS swap an E36.

[suspenceful]

Had a blast at the 1/4 mile drag event yesterday! Managed to take home the 6 cylinder class ($200 cash and $200 tattoo credit!)

Tough being a 6MT, and I gotta get that launch down. I didn't use 2-step because the two other times I tried using it, I snapped an axle each time. Maybe one day I’ll upgrade axles and get a transmission that doesn’t lock me out of 2nd gear. Until then I’m gonna keep enjoying the car for what it is; a great street car that can do 1/4 mile, 1/2 mile, autocross, road course and still be daily driven!

PS: Turns out this little Dragy device is pretty accurate!

 
  

My 60-130mph time at the track was about 1 second slower than on the street. Not sure if it was because of the hot weather or what (130°F IATs). Trap speed is there, but I know the car has a better ET in it.

[gilber33]

Is that a tan 240 with a carbon fiber hood next to you in that first video? Twin turbo LS swap.

[suspenceful]

gilber33 said:

Is that a tan 240 with a carbon fiber hood next to you in that first video? Twin turbo LS swap. 

Yup, it's my friend Brian's Volvo. It's single turbo.

[gilber33]

suspenceful said:

Yup, it's my friend Brian's Volvo. It's single turbo.

Haha. I know Bryan. Bought some LM reps off him once. I thought he was going to twin turbo it. Either way, it's a super clean 240.

[SteelBlue]

Slow

[Rekpoint]

*Cough* BimmerStreet tattoo *Cough*

[suspenceful]

Ran into some crazy cars in Canada!

[GunMetalGrey]

You went to Canada this time eh?

[B C]

Thats a lot of maxed out credit cards on the road at the same time!

[SteelBlue]

[ChrisO]

Scary fast stuff. Crazy that evo is running 44psi, is it over 800whp?

[GunMetalGrey]

ChrisO said:

Scary fast stuff. Crazy that evo is running 44psi, is it over 800whp?

After hearing / watching that evo I did a bit of digging. 
There was one in CO (Elevation relevance) that was on 40psi and made 830whp.
So I'm gonna go with the on in Appleton being over 800 by a good bit.

[suspenceful]

Well, this was huge news for the N54 community yesterday. We've been plagued with shift bog issues for years that no tuner has been able to figure out. The more power you add, the more noticeable the lag/bog is. It's hard to notice in videos, but very noticeable when you're in the car. It feels like the car hits a wall of bricks post-shift, then takes forever to get back into power. During a race, I lose a lot of ground during shifts.

I've tried a handful of suggested "shift bog fixes", but none of them really worked. So, when this was announced, I didn't have high expectations. I loaded it up yesterday and tried it on my way to work this morning. Well, it actually works! I had the biggest shit-eating grin on my face. The car actually responds to fast shifts and feels like it should.

The only problem... it works so good that I found my Spec Stage 3+ clutch slipping after a hard shift. It wouldn't grab at all in the next gear, just revved to the moon. Kind of disappointing considering the clutch has between 3-5k miles on it (hard miles, none-the-less). I'm sure it doesn't help that I have the drag radials on the car right now, meaning it's gripping very well. The car would never spin or chirp tire between the 1-2 shift or 2-3 shift and I'm sure it will now once I address the clutch. Other people have reported snapped axles between shifts at high power this morning. At this point, I don't care about the potential damages... the manual transmission has finally been unlocked.