My slow e30 project.
-
Good post OP
Glad to see you back around here
-
Nice to see you back in the e30 scene. Looks like a clean car!
Sent from my iPhone using Tapatalk
Thanks man! It's pretty clean, definitely in need of paint and some other cosmetic things, but overall a very good base to start with
Nice to see a fresh e30 build instead of the usual gay m52 swaps people r doin.
Didnt your last one end up on its roof?
#M20forLife
You mean this one...
Another m20!
The M20 ain't goin nowhere!
Yay=)
Oh E-Monster, how I've missed thee
Good post OP
Glad to see you back around here
Thanks man, I'm glad to be back!
Some things that have changed since I was last active:
1. My 16 year old nephew bought his first car, a 1995 318is 5 speed, needs some work though..
2. My youngest brother bought his first BMW, a 2000 323i, auto due to the fact he's constantly stuck in traffic.
3. Girlfriend accepted a job at UW Hospital here in Madison and has decided she's buying herself an M2
4. I got sent back to night shift at the PD, and my new 2018 goal is to get Alex back into a BMW and back in here.
-
Alex hasn’t sent his yearly feeler ads to me yet, I’ll have to bug him too. Glad to see you back in a proper BMW!
What a jerk... I'm gonna message him on the old Facebook..
-
3. Girlfriend accepted a job at UW Hospital here in Madison and has decided she's buying herself an M2
Good for her! Good thing there is adequate public transportation in Madison to accommodate her M2 ownership.
-
Good for her! Good thing there is adequate public transportation in Madison to accommodate her M2 ownership.
I'm very excited for her! It's been a long journey, she's worked harder than anyone I've ever met to get where she is, and she was the first person in her class to get a job offer, and at her 1st choice as well. Once she's out of school I don't know what we'll do, she's been a student our entire relationship lol
We had a lot of fun looking at cars, haven't test driven anything yet, but it came down to a Jaguar F Type (400 series), Porsche Cayman, and the M2. From the looks of it the Jag was going to be too long and she doesn't need that much power (even though I believe it's the slowest of the 3), she really only likes Porsche because I picked her up in the 911 on our first date, but the M2 kind of hits everything she liked (helps that she knows I like BMWs, so she's started to appreciate them as well).
-
I'm glad to see you piloting another E30!
If you ever need a competent shop in Appleton let me know, I know this super legit crew that runs on taco bell and detached oil drain lines! -
-
I'm glad to see you piloting another E30!
If you ever need a competent shop in Appleton let me know, I know this super legit crew that runs on taco bell and detached oil drain lines!God.... I should have driven up for this project.... Replaced the plugs and valve cover gasket, as well as the little rubber plugs on the front and back (no idea what they're called). Upon initial start up it ran a little rough, took it for a spin and it still seems to be idling oddly, nothing leaking from what I can see.
Had some high temp paint left over so I did the intake manifold and valve cover.
Also found some VHT red translucent paint from a long forgotten project, and decided to do my tails.
-
tails turned out great!
I'm quite pleased with them to be honest! For $6 and about 20 minutes of work it's well worth it to get rid of that hideous orange...
-
While I'm in here, anyone know exactly how to remove this Zender front valence?
I can see where it's screwed to the original Valance, but there's no way to get a socket or an open-end wrench up there to loosen them. I also can't figure out how to get the original plastic bumper off, I believe I have to remove those two long bolts, which are blocked by the Zender Valance....
-
Bumper is removed by removing the two large torx bolts on the bottom of the bumper, then by unclipping the side marker and turn signal wiring connectors.
The valence is attached to:
-the fender, just behind the side markers
-the fender, at the bottom left and bottom right corners of the grille
-2 screws above the bumper supports
-2 screws behind the fog lights -
Bumper is removed by removing the two large torx bolts on the bottom of the bumper, then by unclipping the side marker and turn signal wiring connectors.
The valence is attached to:
-the fender, just behind the side markers
-the fender, at the bottom left and bottom right corners of the grille
-2 screws above the bumper supports
-2 screws behind the fog lightsSo those two gigantic bolts in the 3rd/4th pics are the torx bits you speak of? I'm not sure how the heck I'm gonna get them out with the Zender in the way. I'll probably have to try to remove them with a pliers, I can push the valance back a little bit, but not enough to get get a torx bit in there to loosen them.
*** Got it off, bumper will be listed for sale as soon as I figure out what the heck to ask for it. #TakingOffers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login