Alpine White Zender Kit E24 633CSI
-
Is it galvanized? Kinda hard to tell
Aluminized steel. Its what most basic exhaust systems are made out of. It can take to heat very well.
-
I got the right tie rods and installed them early last week. Since I bolted everything up, I have yet to drive the car. I really wanted to weld the exhaust before hand and I don't have an Argon tank at my shop and I am too lazy to load one into/onto my car from my work. Maybe this week I will get to it....
I also split the Style 5's I bought and have since tossed the hardware into the tumbler. I still need to find tires, paint the faces, and polish the lips. Once these are built I can start on the RS's!
Oh! I also bought a new battery because one of the cars I bought a few months ago didn't have one, so it got salvaged from this car. So now with the new battery, I was also able to make a new battery hold-down bracket. So that's crossed off the list again!
-
Exhaust installed and hung! Looks really weird seeing pipes stick out the back of this thing again. I plan on putting some nice tips on it to clean it up a bit.
I didnt take any pictures of the nice hanger I made but maybe I will once I install the tips.
Im thinking of ordering some Silverlines like the factory tips. They have a rolled outside edge.

-
Just for you @snap
-
ah, yes! the song of my people!

-
The Silverline tips came in. Super nice quality and a perfect fit, better than the OEM ones that were on the car. Im happy with these!
Parts to order / find
- Tie rods (DAMMITTT)
- Steering Arm
- Trailing Arms
- Suspension Control Arm and Ball Joint
- Ball joints
- Front valanc
- Shift Bushing
- Muffler/ rear exhaust
- Battery tie down
- Speakers (4 minimum)
- Wipers
- Door light switch
- Tires
Minor Items
- Right rear window switch (in the rear of the car) @YoungCR -and might have this?
- fog lights
- Front springs
- Tail light surrounds (might need to make my own)
- Interior dash blanks @YoungCR -might have these?
Labor
- Remove tint
- Muffler/ rear exhaust
- Install v belts
- Adjust steering box
- Extreme interior detail/ buffing session
- New brake pads / Rebuild caliper
- Turn signal Relay needs to be cleaned or replaced
- Finish buffing the entire car
- Remove the pin stripe
- Installed the side skirts with stainless hardware
- Refinish the Style 5's
-
big 6s make the best noises.
thought about painting the bumper surrounds white, like on e30s verts?

-
I'll scrounge through my parts this weekend, for sure have plenty of window switches.
Awesome! Thanks Chris!
big 6s make the best noises.
thought about painting the bumper surrounds white, like on e30s verts?

Those are actually World Bumpers ^^^ I was looking for a set but they only came on the later model E24's.
To answer your question though, Yes I have though about it. I thought about painting the entire car..
AND THANKS GUYS!!!!
-
Have not really touched this car in awhile. Partly because I have been working on other projects, and partly because I have been really busy at work. I did but something simple to install, and the next big purchase will be lowering springs and struts.
Keyless entry. I installed a similar unit on my E30 and its one of the greatest things ever. Plus I really had to squeeze my pockets for the $10.49.

I have been slowly refinishing the Style 5's I bought for this, and they are about 50% done. barrels are stripped and polished, paint is mixed and waiting, I just need to finish sanding the centers. They should look pretty similar to the theme of these RS's when they are done minus the gold "BBS" logo, the caps I have a chrome:

-
Have not really touched this car in awhile. Partly because I have been working on other projects, and partly because I have been really busy at work. I did but something simple to install, and the next big purchase will be lowering springs and struts.
Keyless entry. I installed a similar unit on my E30 and its one of the greatest things ever. Plus I really had to squeeze my pockets for the $10.49.
I have been slowly refinishing the Style 5's I bought for this, and they are about 50% done. barrels are stripped and polished, paint is mixed and waiting, I just need to finish sanding the centers. They should look pretty similar to the theme of these RS's when they are done minus the gold "BBS" logo, the caps I have a chrome:

Are real BBS logos really like $200 dollars or is someone just wildin on eBay?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


