Steelblue E36 Build Thread
-
I vote silver on the wheels.
Silver and gunmetal are the finalists.
-
That's the bumper off my parts car, correct?
Indeed. Spider sold his e36 and had no use for it so I bought him out of it. I plan on fixing the crack and striping the paint by the end of the week. Hopfully to bring it to a paintshop by monday.
-
Do not buy uro parts ever
They will let you downIf you do get white wheels, just wax them or coat them- brake dust ain’t no thang after that
-
Fuck this coolant expansion tank. Can't get the damn hose seated correct. Got my car to temp only to find out it's leaking from the hose at the bottom of the tank. This is a pain in the ass.
If anyone wants to send me cash/lowering springs for my birthday I'll send you guys my PayPal/address [emoji14]
Sent from my SM-G955U using Tapatalk
-
Hey i'm curious, does the Mishimoto tank have the bleed line in the top internally connected to a tube going to the bottom or does it just dump into the top of the tank?
I assume you are talking about the small hose that is on the outside. Yes there is another hose on the inside that goes to the bottom of the tank.
-
I assume you are talking about the small hose that is on the outside. Yes there is another hose on the inside that goes to the bottom of the tank.
Yea, the one from the top of the radiator, thanks!
-
A hose was 2 big and a hose was 2 small. So i drove to school pissing coolant. I next-day shipped an ECS hose kit yesterday. Will get it around noon today and install in on Saturday. Hopefuly powder coating and painting bumper next week. I fixed the crack and slight warp on the bottom of the bumper lastnight. Starting to wonder why the original owner of the bumper used some sort of filler to fill all the scratches on the bottom. So now I need to sand the filler off and hand it over to the professionals.
-
They may have used an icing instead of trying to take the whole bumper down evenly.
Sounds tasty!
-
They may have used an icing instead of trying to take the whole bumper down evenly.
That I would have been ok with. Whatever they we're trying to do they we're layering it on and it wasn't even nice. It's almost all sanded off and it looks fine.
Sent from my SM-G955U using Tapatalk
-
Sounds tasty!
Looks like fundip. Wish it was...
Sent from my SM-G955U using Tapatalk
-
Have you considered painting it yourself? You can get a whole kit with spray can of adhesion promoter for the plastic, primer, color matched paint, and catalyzed clear from paintscratch.com for around $90 (less if you don't want the other stuff in the kit). It won't be 100% perfect, but could be worth the savings compared to paying a body shop.
-
Have you considered painting it yourself? You can get a whole kit with spray can of adhesion promoter for the plastic, primer, color matched paint, and catalyzed clear from paintscratch.com for around $90 (less if you don't want the other stuff in the kit). It won't be 100% perfect, but could be worth the savings compared to paying a body shop.
I liked the fact that I could pay someone and the job not turn out bad. I have one more contact then that is probably the way I'll go.
Sent from my SM-G955U using Tapatalk
-
I spy a uro part
RIP
-
I spy a uro part
RIP
Hahahaha fuck you. It was in a hose kit from ECS.
Sent from my SM-G955U using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login