Lifted E30 V2

[KaiserRolls]

Snap said:

Right you are, Ken!
 

Most extreme elimination challenge was the greatest show ever

[GunMetalGrey]

I spent $20 on something completely pointless that I'm excited to get on the car. 

Other than that I blocked off the overboost valve on the intake manifold, didn't know it was a thing, but it is. Now I can not be dumping air out of that port when trying to go above stock boost levels.

[Jdesign]

GunMetalGrey said:

I spent $20 on something completely pointless that I'm excited to get on the car. 

Other than that I blocked off the overboost valve on the intake manifold, didn't know it was a thing, but it is. Now I can not be dumping air out of that port when trying to go above stock boost levels. 

Sounds dangerous

[GunMetalGrey]

Dealership called today and told me the injector crush washers that I ordered were denied because they were illegal to bring into the US. 
They exist on US spec E28 524TD's...... what the hell BMW.

Oh, but in good news they are sending me the EURO ONLY 324TD alternator bracket that I asked about....................................... I'm so confused. 

Note on the alternator bracket, it was like $60 anywhere I could find it online (after shipping that takes 1+ months), dealership is getting it in a week or so for $13. Not bad.

[stealthbimmer]

Try a different dealer?

Sent from my SM-G930R4 using Tapatalk

[Jdesign]

"Just checking to make sure you don't have any crush washers Jose" 

Seriously though, I would try other dealers. Are they interchangeable with the Benz injectors?

Also I have had that where I can get a part faster and cheaper at the dealer than online. Who said the stealership is the most expensive?!

[B C]

https://www.ebay.com/itm/6-X-MONARK-EINSPRITZDUSE-FUR-BMW-E28-E30-E34-324D-524D-524TD-NOZZLE-INJECTOR/222008707768?hash=item33b0c00ab8:g:nCgAAOSwnLdWqlbl&vxp=mtr

Are those of any use to you? they sell individual ones too

http://www.fuelinjection-parts.com/Bosc-BMW.html

[GunMetalGrey]

I don't know if it's the dealer, they have no issue ordering them for me but when the request goes to BMW over in Germany they are saying it is illegal to send that item here. Usually only happens with Euro only stuff, but I may go there today and see what the heck is going on. It is a US part, so it getting denied is not logical. 

Those are the nozzles Snap, I'm really hoping I don't get to that point. Dude guy is shipping the new injectors today so I'm going to call and see how much testing / adjusting them will cost, and if the cost is low I will have them cleaned and inspected. If the cost of the shop is too high I will just buy the stuff and do it myself. 

Fuel pump is still dumping fuel and I found that seal kits cost about $15 so I ordered on of those as well. While I have all of the injectors out I may as well pull the fuel pump too and reseal that. 

As for my $20 purchase...

I got the middle ones all drilled and mounted, but need to do the outside ones yet. 

I have issues with not doing things properly so I learned how to take apart the sunroof stuff and get to the roof!

I look forward to wiring them up and putting everything back together! I will be wiring them to the running lights to they are pretty much always on. 

I looked inside the intake manifold after pulling it and I think I need to do some cleaning!

I'm glad to finally have injectors that aren't garbage on the way, and I feel like I'm digging myself out of the hole that this motor has been putting me in! 

Next step will be to get the intercooler in place and piped! Ordered some couplers to make that happen, but I'm not sure if I will be sticking with the stock intake manifold for this part. 

Until next time!

[B C]

How is the rear view mirror even attached/removed? Mine wiggles a little bit and id like it to not wiggle a little bit. Can you, with your vastness of space and clarity provide me with any such explanation on removing/tightening the rear view mirror? its something id rather not break off out of hopelessness

[GunMetalGrey]

Snap said:

How is the rear view mirror even attached/removed? Mine wiggles a little bit and id like it to not wiggle a little bit. Can you, with your vastness of space and clarity provide me with any such explanation on removing/tightening the rear view mirror? its something id rather not break off out of hopelessness

 I remember trying to pull a mirror out of a shell before and it didn't want to move. 
It is spring loaded pins that push into the chassis and apparently you can just wiggle and pull. 

[dealindave]

GunMetalGrey said:

I don't know if it's the dealer, they have no issue ordering them for me but when the request goes to BMW over in Germany they are saying it is illegal to send that item here. Usually only happens with Euro only stuff, but I may go there today and see what the heck is going on. It is a US part, so it getting denied is not logical. 

There are some random parts on US cars that end up being blocked for no reason and it's frustrating as hell.  We spoke with a BMW rep at SEMA in 2016 in hopes to get more info and finding a workaround for their policy and all we got was a blank look. BMW seems totally oblivious to why this is even a concern among enthusiasts.

If you need blocked Euro parts let me know. We work with a dealer in Europe specifically for this reason. Shipping takes a bit longer and is a little more expensive, but it is an option.

[Jdesign]

Dealindave coming in hot with the hook up!!!

[KaiserRolls]

*cocks sold separately

[B C]

That line reads more fluidly than it should

[Jdesign]

Bodily fluid?

[dealindave]

Jdesign said:

Dealindave coming in hot with the hook up!!! 

I have a very favorable opinion of this project. While some may consider this an abomination, I am very much looking forward to seeing it's completion. 

KaiserRolls said:

*cocks sold separately

Oh no, always free for you cutie.

[GunMetalGrey]

15 holes in the roof later...

Test fitting and marking more holes

Added a wire to get them running without buttoning the whole car back up. 
I'm extremely pleased with how they turned out!

Dave, you will be getting a message from me! Thanks for the help on that, didn't know you were still lurking on this thread!

[GunMetalGrey]

Oh, my coolant expansion tank is dry now. Gotta find where that is going. Assuming heater core yet, need to swap that out.

[suspenceful]

Lookin' rad.

Also, did you forget to tighten your oil pan drain bolt? 

[GunMetalGrey]

suspenceful said:

Lookin' rad.

Also, did you forget to tighten your oil pan drain bolt? 

Nope, as stated somewhere earlier that is all diesel leaking from the fuel pump. I pulled the fuel feed line off of it yesterday so hopefully it will stop soon.