chit chat thread
-
Ryan... said:
Sold my e36 Vert to a gentlemen whom I believe is already a member here (Marc).
Used part of that money and bought a Kimber Custom II from another BMW guy, who should be joining up shortly.
Now the important stuff, what have I missed in the past XX months since I last posted?
did you get he kimber in two-tone? drool...
what have you missed this winter? not a whole lot. secret santa. even though snap said he was going to sell the e30, instead he bought more non-bmws and owns like 5 cars or something. young & sons salvage is in full boom. ice rally shenanigans hasn't started due to the weather, sadly.
Yes sir, 2 tone!
Snap never was a trustworthy man, I learned not to believe him..
I would love to do ice shenanigans, but I rhino my truck it's a bit heavy for it..
Sent from my SM-G900R4 using Tapatalk
-
Ryan... said:
Sold my e36 Vert to a gentlemen whom I believe is already a member here (Marc).
Used part of that money and bought a Kimber Custom II from another BMW guy, who should be joining up shortly.
Now the important stuff, what have I missed in the past XX months since I last posted?
Pictures?
Don't have any good ones, but here she is!
Sent from my SM-G900R4 using Tapatalk
-
Hope you paid with weed
Well duh.......
KIMBERS ARE SEXY! I'm poor so I had to suffice with a S&W for my 1911. Much like!
My Sgt carries a S&W 1911 on duty, his looks pretty slick!
-
Well duh.......
My Sgt carries a S&W 1911 on duty, his looks pretty slick!
Sgt must be poor too. Sorry to hear. Do you bring him meals for the holidays?
-
Sgt must be poor too. Sorry to hear. Do you bring him meals for the holidays?
My apologies, apparently it's a Springfield.
I love the kimbers. My 1911 is a sig saur.
Owning a Sig is next on the bucket list. I wanted a H&K VP9 until I got a chance to shoot it...
-
We need a firearms thread for science
-
I'm starting a new project soon for my dad. He lost compression on his e46 330i and Mraz told him they *thought* it was the head gasket but wouldn't know for sure until they replace it. It has really low compression in all cylinders and they said they had never seen this before hence the "we start with this then see what happens" plan. With a $3,000 estimate to find out if they're right he called me. So, it sit's in my garage while I try to find time to tear it apart.
So I had a chance to look at this yesterday and found that there certainly was low compression on all cylinders. I started doing a wet compression test and the numbers improved significantly. Compression was 175ish after doing a wet test and the engine sounded like it was actually making compression as I did more cylinders. After testing them all the engine actually sounded like it cranked real strong so I tried to start it. After a few cranks she fired right up! I opened up the garage doors to clear out all of the 0w40 I used for the wet test and let it run for 10 - 15 minutes. The car idled fine, revved fine and no CEL. I did find a couple injectors leaking at the rail which makes sense because my dad had been complaining of a fuel smell and the valve cover gasket has a slight leak.
What I concluded was that my dad let the car sit for a month or so because of the fuel smell. This let the cylinders dry out and me doing a wet compression test re-seated the rings.
My Dad and his Fiance were ecstatic! He's now convinced this is going to only be a warm weather car for them and he's in the market for a cheap AWD car.
-
For those of you who were wondering, Condor Speed Shop has started working with the supplier of Treehouse's eyeball arms (no longer in business) and you can pre-order for not a bad price compared to what Treehouse used to charge, should be shipped soon too.
-
I was actually going to mention that Treehouse disappeared from the internets when I went to see about getting replacement inserts a few months ago
Since it sounds like the supplier is the same, id be willing to bet the inserts from Condor would fit! They said in the thread somewhere on r3v that they were going to offer replacement inserts eventually, so I was planning on picking up a few pairs just to have spares.
-
What's the benefit of these vs offset solid CABs? Space saver for long tubes?
-
What's the benefit of these vs offset solid CABs? Space saver for long tubes?
Also curious
-
What's the benefit of these vs offset solid CABs? Space saver for long tubes?
Clearance, stiffer due to less bushing material, and that's aboot it.
Except for the ultra lightweight mod of the aluminum ones.
They do come in both centered and offset varieties.You are pretty much required to use these with certain 24v swap headers.
-
bimmerworld also has these, for a few more dollars. I ordered some on Black Friday for a better deal, because at that point they were the only place that was selling them.
glad to see there are more options out there.
i am putting them into my e30 for exhaust clearance, as mentioned. currently, the exhaust is resting on the standard arms which i believe is transferring a considerable amount of vibration and noise into the cabin. i've had one guy tell me the increase in NVH is tremendous and i will regret it, while others say its not really noticeable. we shall see. i certainly have very low standards as to what is acceptable NVH so i can't imagine it will be a problem. one thing everyone agrees on, though, is it sharpens the steering a little bit.
Dan
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login