'88 E30
-
So you have the clutch/flywheel/trans bolted up?
Yuss
-
It happened
Not going anywhere
Solid mounts. I don't have any fillings yet, so I'm not too worried about vibration.
Cleaned up the carrier. Installed the new Delrin stuff from condor. Popped the z3 lever on. This thing is very tight and awesome. There's like zero slop. Zhp knob came in too.
Just need to hook all this crap up now
-
I'll have to break the clutch in. Was trying to plan a road trip somewhere
-
Looking great!
I took out my condor speed trans mounts and popped in some OEM e21 bushings. The trans vibrations/noise with the Condor's in there was annoying after awhile IMHO.
@DrLeadFoot
-
Looking great!
I took out my condor speed trans mounts and popped in some OEM e21 bushings. The trans vibrations/noise with the Condor's in there was annoying after awhile IMHO.
Thanks!!
I may end up going with e21 bushings. I figured I'd give these a try. I have yet to drive/ride in any vehicle that has been more uncomfortable/louder/have more vibration compared to the Supermoto I practically daily'd for 6 years.
-
Just remembered at like 2:30 am that I'll have to buy an EWS delete chip (may get one with a "tune" on it) just unsure who to buy it from as there are about 4+ vendors that seem to make them
-
S50's had EWS? I thought that was an OBD2 thing
That's exactly what I thought too. I do have a silver label DME and not a red label one if that makes a difference. I can't really find any solid info one way or the other
-
Turner had this on their website. Note the line that says e30 with engine conversion
-
From some of the misinformation I read last night at like 3am, the red label DME did not have EWS. Silver labels did
-
Getting closer
-
It's in. After some deliberation, my buddy & I just decided it should be welded in. If I want to remove it, I'll cut it out & get a new one for $90 if it isn't salvageable
-
Pretty much everything is hooked up now.
Still need driveline stuff and I'll be ordering a sssquid tune shortly to get rid of the EWS and get a basic tune for now. Still have to attach new stainless clutch line and bleed clutch. Need to attach radiator/hoses, fill and bleed. Need to Figure out a way to mount to bumper for now as well
-
Scratch the tune comment. Still emailing back and forth with squid and TRM.
-
Bought a tune from sssquid and learned a lot about DMEs. He's very helpful and his price was $175 vs TRM @$250
-
This car needs a Dinan supercharger. I know a guy if your interested.
-
This car needs a Dinan supercharger. I know a guy if your interested.
Just bought an NA tune
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login