540i: Resonator/Muffler delete.

[Dominic540]

Sounds like a plan!

Ps. Sorry for the thread jacking Zach

[rampelsauce]

All good.  It's for the cause.  

TJ texted me with another exhaust option.  I guess its a not so expensive muffler that has some kind of internal valve that opens at WOT.  

I wouldn't mind checking that out.  Chopping up exhaust is pretty cheap.  

V8 Mafia 4 LYFE

[Earl]

I say just remove the exhaust manifolds and be done with it=P That or zoomies out from under the front

[Dominic540]

Here is the entire exhaust from headers back after the scuba tanks are removed. I made the cut directly after the rear axle when installed on the car.

[Earl]

This exhaust really confused me...

[rampelsauce]

I'm toying with the idea of buying another cat back stock exhaust and cutting off the dead end side of the Y, and just using it as a test dummy in general.

[Earl]

Just noticed something. If you cut off the dead end, don't you lose an exhaust hanger?

[rampelsauce]

Yeah.  I'd have to figure out a bracket.

Nothing a welder and a grinder couldn't solve.

[andyhundley]

Doesn't the A in i/A stand for North American model and not automatic? Every e30 I've had except for the euro car had that on the door tag and they all were 5-speeds.

[rampelsauce]

Found this on Bimmerforums:

"We have been over this a few times. Pre-1991 or so, every American BMW had "525i/A". Then they changed it to 525i for manual and 525iA for auto, and that's how it is today.

If you see someone list a car as 525iA that means auto, nobody uses it to say American. 525iM is not official term for a manual but makes sense as the counterpart of the "A" suffix."

[Earl]

[Rowleym]

So I think I need to build a m60 e30 this next year. 

2015 goals! I think it would be such a fun daily.

[CMart]

Rowleym said:

So I think I need to build a m60 e30 this next year. 

2015 goals! I think it would be such a fun daily. 

[rampelsauce]

S63 E30's are better.

[CMart]

Has that ever been done?

rampelsauce said:

S63 E30's are better.

[Earl]

CMart said:

Has that ever been done?

http://www.carforums.co.za/viewtopic.php?f=7&t=53280&start=75

[rampelsauce]

When's the 540 party?  I might just have to do my exhaust mods before then.

[BMWben]

Well as long as my car is out of the shop by Tuesday I'll be home sometime Wednesday or Thursday so we can plan this thing out.

[Dominic540]

rampelsauce said:

When's the 540 party?  I might just have to do my exhaust mods before then.

Would I still be allowed with my 525?

[rampelsauce]

So we're getting together on the 28th for beer and exhaust cutting of epic proportions.  I'm bringing a welder and grinder and possibly a growler or two.