E46 M3 in Whitefish Bay
-
A video from my TX days...
http://youtu.be/g4iVkS0s_4U -
Thanks. I have an extra rear subframe so I've got the crappy work done of removing and installing the bushings. Just need to get a plan together to get the cracks welded up. Then I'll do the same...epoxy the TMS plates on. I'm also replacing the inner axle boots and upper control arm bushings. Might do wheel bearings if I'm feeling froggy but probably not.
-
I was lucky and didnt have any cracks yet. Sounds like youve got a lot done. Getting the bushings out is probably the worst of it (was for me anyway). The epoxy worked great on mine. What bushings did you end up going with? Nice seeing someone else tackle the sub reinforcement diy. Kudos to you.
-
Bimmerworld aluminum bushings. Had a bad experience with the Poly PF subframe bushings on my 330 so I'm going solid.
-
The engine was rebuilt 10k miles ago, everything looked fine. Its something I'll do later this year or next year.
-
The engine was rebuilt 10k miles ago, everything looked fine. Its something I'll do later this year or next year.
What you really need to do is put a turbo on it....
But really.
Do you have solid diff bushings as well? I was told to use solid subframe bushings, spherical rtabs, and some poly for the diff bushings. This will be a multipurpose track car though ("drift", and hopefully autox)
sk8 or die
-
Nope, OE diff and RTABS w/limiters.
-
-
My subframe nightmare:
@DrLeadFoot
-
-
Thanks Dastuz! I've got everything I need...except for a solution to get the cracks welded up. Damned apartment with its underground garage and sloped outdoor parking.
WiscoE90...my car is anything but discreet. I'm glad the cops haven't gotten mad with the volume. I have gotten some dirty looks from local Prius drivers.
-
someone said:
School me on locking down the vanos please.
The VANOS will develop a rattle...more annoying than potentially fatal. Most street cars will want to address this.
BUT...there are a couple of issues which are potentially fatal to the engine
1. Exhaust hub tabs break - a Besian oil pump disk may help
2. Cam bolts strip and back out - replace with updated OE bolts
3. OEM belt tensioner breaks - replace with OE part
4. High pressure oil line to VANOS fails - replace with Bimmerworld line
You can check #1 and #3 when you do a valve adjustment. #2 requires you to remove the VANOS.
The exhaust hub failure seems to be very hit and miss.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login