Jake's Epic BMW 135i Build Thread! (5+ Years of Ownership)
-
Much better! That old knob was ugly and probably way over priced!
Looks great!
Thanks guys, I agree!
I decided that I was gonna try to install the downpipes today. A few friends came over to give a hand... all of which are BMW owners.
On the forums, most people say that installing downpipes is a major pain-in-the-ass. They noted that they would rather pay someone else do it if they ever had to do it again. I went into this expecting it to take a while.
We grabbed gaskets from AutoZone, ordered pizza, and slowly got started around 1:45pm.
We were very lazy throughout the whole process. Ended up getting most of the bolts off, but one in particular was giving us trouble. It was in a horrible spot and we (aka Ben) rounded the nut off. This really held things up, so why not take a break and light up the hookah? Please note: Ben under the car realizing he really fucked up
Getting dark now... better get back at it. We ended up having to torch the shit out of it and use an air chisel to snap the stud/nut.
After we got that out of the way, we still needed to unbolt brackets, v-bands, four O2 sensors, and unhook the whole exhaust from the hangers. We even had to unbolt the steering rack and move it out of the way for more room. Maybe we should have started earlier?
Believe it or not, I did work. I just snapped some pictures throughout the day as I got tools and drinks. I wish I would have taken more pics (as always with projects).
I think around 10:00pm we finally got the catted downpipes out. I was hoping the car would be buttoned up and back on the road by this time.
Enough for tonight. Back at it again tomorrow after work...
-
I can't believe how quickly your making progress on her! I've always thought these looked like a Bulldog.
-
I have discovered you can't even get exhaust manifolds off of an m50 without unbolting the right engine mount and lifting the engine an inch. I can imagine how cramped it is in there after several more years of engineering...
It's not so bad where they connect to the exhaust (minus 1 bolt), but it's blinding trying to take off and put on the v-bands up where the turbos are. The bolts and O2 sensors are a pain.
I can't believe how quickly your making progress on her! I've always thought these looked like a Bulldog.
I can't believe it either, I wasn't planning on very many mods but I can't stop now.
The downpipes are finally in.
Also, I don't have a picture of them, but I wet-sanded and polished my exhaust tips since we removed the exhaust. They were black and caked with crap. I always assumed my exhaust was some sort of custom setup but as I cleaned the tips they revealed a "Riss Racing" stamp. Sure enough, this thing has a $1300 3" catback exhaust!
And as promised, a short teaser video. I only recorded these to show what it sounds like in and out of the car.
Excuse my excitement as I grannyshift up the onramp, I've never lost traction in 3rd like that before.
(I'm not sure why my voice sounds weird right at the beginning)
After this video I put bus lengths on a new Camaro a few times from 50-120mph as he tried messing around with me. I'll drop the E85 fuel pump in next week and reflash the ECU more aggressively. Can't wait to hit up the strip and get her on the dyno again.
-
Where is the video?
Way to get this thing into beast mode so quickly!
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
that thing absolutely rips!
keep it up!
^^^ +1 my goodness!!!
-
This makes me want an N54 so bad!
-
Where is the video?
Way to get this thing into beast mode so quickly!
Sent from my SCH-I535 using Tapatalk
It was embedded at the bottom of the post. Otherwise try this link:
that thing absolutely rips!
keep it up!
^^^ +1 my goodness!!!
This makes me want an N54 so bad!
Thanks guys! As always, check out www.My1Series.com for more info.
-
BMW 135i - Backroads by Jake Spence Photography, on Flickr
-
BMW 135i - Backroads by Jake Spence Photography, on Flickr
Ughhhhh, that lens is cheating. Looks soooo good. Might have to ask for it for my birthday because of these recent pictures...
-
Ughhhhh, that lens is cheating. Looks soooo good. Might have to ask for it for my birthday because of these recent pictures...
The post-processing helps. It's not always the lens.
Straight out of the camera:
-
This weekend I installed my Walbro 255 inline fuel pump and re-flashed the ECU!
Check out my blog post for pictures, details, and datalog graphs: www.my1series.com/2014/06/23/inline-fuel-pump-and-flash
-
even more insanity
requesting more videos.
-
Yesterday I got a chance to line up against a local guy. He has a 500+ whp WS6 that ran a 11.5 second 1/4 mile.
Started at ~25mph. He got about a half-car length on me from 25-50mph. After that, I was gone. Put 3+ lengths on him by 90mph.
Keep in mind, his car is setup for dig races, but still.
Will be faster after this weekend...
-
Turbo bimmers must destroy all American Muscle. Every. Last. One.
I might change my name to The (like THE Ohio State University) Mustang Hunter.
@DrLeadFoot
-
I have a video in the works. Just need more time to film and edit.
Expect something awesome late next week...
Includes obligatory tire shredding. I'll also try to have someone film me putting an R6 in the dust.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login