New ride! 89 e30 vert
-
I was suspicious that the odometer was not reading correctly. Sure enough, we drove to Wausau to visit family and the distance is exactly 200 miles, the odometer only counted 165. The speedometer is correct though. Doesn't this all come from the sensor in the differential? Can the odometer gears partially fail? On the bright side this means my fuel economy is better than I thought, 24-27 after correction. My tires are 195-70R14 which is a little taller than the door sticker that calls for 195-65R14, but the speedometer is very close to correct.
Will a different differential ratio mess up my speedometer?
Can the OBC be changed to miles/gallons vs km/liters? My e36 switches between but I couldn't figure out this one.
-
Hormel near Beloit? I heard that someone who worked there will never eat the chili. I used to work with pumps for the food industry and things seem to be clean enough for me to not worry about it (except for when a pump crashes and sends undetectable stainless steel chunks through a batch), but maybe you have seen some other horror stories.
Id like to learn PLC
What pump company? We have several x ray machines throughout the process to detect foreign materials. It is clean, but the smell of the food goes from good to sickening after a while. We cook and can all of the canned chicken that gets the Hormel, Valley Fresh and Great Value Walmart labels for the whole country. Over 1,000,000 pounds of chicken a week. We also make the Hormel Compleats, shelf stable microwave tray meals.
I have noticed that once in while the tach needle will flicker down and then pop right back up. Some internet searching leads me to possibly the CPS (the plastic is cracked where the cable goes in) or a grounding issue. I believe this may also be causing my slight surging while using cruise control.
-
Also on my wiper issue, referencing page 6160-0 in the 88 vert ETM, it appears that it is either the switch on the column or the ground connection on the column, this is the only place that would affect all wiper settings, unless the problem is in the wiper unit itself.
-
Swapped the dif yesterday, from the 4.10 open to a 3.25 open, it went good, both looked great inside, the 3.25 was cleaner. It must have had fluid changed at some point with something decent. It is a million times better to drive, I don't feel like it lost much for acceleration as you can hold gears much longer, it just barely hits 60mph in second gear, and cruises at 2500 rpm when at 71-72mph. I will be rechecking fuel economy over the next week to see how that improved as well. This would be a perfect gearing IMO for guys with more power too (Snap).
Old one out.
4.10 internals.
e30 to e28 flange comparison, e30 is on the left e28 on the right.
Outside of cover comparison, e30 is on the right.
Inside of cover comparison, e30 is on the right, notice the e28 dif is much cleaner.
3.25 internals.
Easy way to fill the fluid, with a full drain it was exactly 2 quarts. Royal Purple 75-140.
-
I drove a stock M20 5spd with a 2.93 once, I was very surprised that it wasn't more of a dog off the line. It was completely fine and driveable. I only noticed that it lacked the freeway acceleration I was used to.
I was thinking more along the lines of a 3.46 but im probably more likely to find a 3.25. I will convert it to LSD if I need to.
Glad you are liking it, interested to find out the mpg difference
-
I drove a stock M20 5spd with a 2.93 once, I was very surprised that it wasn't more of a dog off the line. It was completely fine and driveable. I only noticed that it lacked the freeway acceleration I was used to.
I was thinking more along the lines of a 3.46 but im probably more likely to find a 3.25. I will convert it to LSD if I need to.
Glad you are liking it, interested to find out the mpg difference
Just a downshift away. It seems that 3.25's are plentiful as every m30 e28 had them, some LSD and some not. The m20 e28's had 2.93's except for the Seta/5spds had 3.25 open which is what mine came from. Seta/auto had a different ratio but I don't remember what it is.
-
Awesome glad it worked!!! also 100th to post on this topic!!!
1984 BMW 528e - SETA and manual swapped! M50 to come!!!
1988 BMW 528e - Need parts?
1991 Chevy C1500 (mighty 350 with TBI and Wisconsin weight reduction package)
1996 Mazda Miata (SOLD!!!)
1996 BMW 325i (Donor car)
1998 Chevrolet Corvette (BEAST)
2001 Jeep Grand Cherokee (BROKEN)
-
I bought some LEDs and resistors and fixed my burnt out OBC backlight today. Can't wait to put it in and see how it looks after work. Pretty easy mod if you can solder. I bought enough parts for 5 cars. PM me if you need yours fixed. I will get some pics, I used orange LEDs which look like a nice match for the interior illumination.
A few more things to get this car in perfect working order and it will be for sale, I stopped and showed it to the guy I bought it from a couple days ago and he claimed first dibs on it so maybe it will be an easy sale. It is really fun and I wish I could keep it but I just don't have room for it, I can't really justify two summer cars. It needs a good home where it can be kept in a nice garage all the time.
-
Pulled the gauge cluster, the odometer was counting slow, about 83% of actual distance. The "e1" gear was missing a couple teeth, ordered one for 7 bucks from http://e30odometergears.com/index.php?page=buy-e30-odometer-gears . Great price and had a good how to, it seems odd to me that the gears are a soft plastic/rubber.
Working on finishing this car up today, I want everything to be in good working condition.
-
Wipers had a couple issues, they would only wipe if you wiggled the stalk around, and then only once. I took the steering column apart and cleaned the ground screw. Good to go! Then with the windshield dry the right wiper arm was slipping on the shaft, turns out the nut at the base of the arm was too loose, snugged that up and problem gone. Next up install the bowl reinforcement.
-
Here are a couple pics. The odometer gear had 2 of the 12 teeth missing, just as I had calculated 83% of actual travel was recorded. It wasn't split until I pulled it off. I thought it was odd that the gears are a stiff rubber?
And Earl would be proud of my hardware for the flywheel cover. I didn't want hex bolts because there wouldn't be good clearance to use a wrench on them so these were a good compromise.
-
Super easy, have you removed the cluster before?
Not on an e30
-
Wipers had a couple issues, they would only wipe if you wiggled the stalk around, and then only once.
yowo
-
yowo
Uh, does this mean yours does the same thing? haha.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login